SKF Nitrile Rubber (NBR) Seal, 25 mm ID, 40 mm OD, 10 mm
- RS-stocknr.:
- 266-9040
- Fabrikantnummer:
- 25X40X10 HMSA10 RG
- Fabrikant:
- SKF
Subtotaal (1 verpakking van 10 eenheden)*
€ 12,75
(excl. BTW)
€ 15,43
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 20 stuk(s) vanaf 12 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 + | € 1,275 | € 12,75 |
*prijsindicatie
- RS-stocknr.:
- 266-9040
- Fabrikantnummer:
- 25X40X10 HMSA10 RG
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Seal | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 10mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Seal | ||
Seal Type Rotary Shaft Seal | ||
Thickness 10mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- Land van herkomst:
- CN
SKF Seal, 25mm Inside Diameter, 40mm Outside Diameter - 25X40X10 HMSA10 RG
This seal is a rotary shaft seal designed to separate rotating and stationary components and retain lubricants in rotating assemblies. It features a rubber outer circumference and an elastomeric primary sealing element to maintain oil or grease containment while limiting ingress of contaminants in industrial rotating equipment.
Features & Benefits
• Nitrile construction resists common oils and greases
• Garter spring maintains consistent lip contact under rotation
• Auxiliary non-contact lip improves contamination exclusion
• Accommodates minor misalignment during shaft operation
• Garter spring maintains consistent lip contact under rotation
• Auxiliary non-contact lip improves contamination exclusion
• Accommodates minor misalignment during shaft operation
**Applications**
• Suitable for industrial motor and gearbox shafts
• Ideal for automation actuator rotary joints
• Used with electrical motor drive assemblies
• Can be used for centrifugal pump shaft Seals
• Ideal for automation actuator rotary joints
• Used with electrical motor drive assemblies
• Can be used for centrifugal pump shaft Seals
What temperature range can it withstand in continuous service?
It operates from −40°C up to 100°C in normal use with short-term tolerance to 120°C.
How does it behave at higher shaft speeds?
It is rated for circumferential speeds up to 5.03 m/s and rotational speeds up to 3840 rev/min.
Is it compatible with pressurised housings?
It is intended for low differential pressure conditions and is specified for a 0.03 N/mm pressure differential.
What housing and shaft interfaces are required for correct fit?
The seal fits into a 40mm bore and runs on a 25mm shaft with a 10mm section width.
Are there related accessories to aid installation on worn shafts?
A speedi-sleeve accessory is referenced for use when shaft repair or undersize restoration is needed.
Gerelateerde Links
- SKF Nitrile Rubber (NBR) Seal 40 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 25 mm OD, 5 mm
- SKF Nitrile Rubber (NBR) Seal 25 mm OD, 6 mm
- SKF Nitrile Rubber (NBR) Seal 37 mm OD, 5 mm
- SKF Nitrile Rubber (NBR) Seal 37 mm OD, 6 mm
- SKF Nitrile Rubber (NBR) Seal 45 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 40 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 40 mm OD, 7 mm