SKF Nitrile Rubber (NBR) Seal, 27 mm ID, 47 mm OD, 7 mm

Bekijk alle Seals

Subtotaal (1 verpakking van 10 eenheden)*

€ 15,46

(excl. BTW)

€ 18,71

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 30 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
10 +€ 1,546€ 15,46

*prijsindicatie

RS-stocknr.:
266-9098
Fabrikantnummer:
27X47X7 HMSA10 RG
Fabrikant:
SKF
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

SKF

Product Type

Seal

Seal Type

Rotary Shaft Seal

Thickness

7mm

Seal Material

Nitrile Rubber (NBR)

Land van herkomst:
CN

SKF Seal, 27mm Inside Diameter, 47mm Outside Diameter - 27X47X7 HMSA10 RG


This seal provides a rotary shaft sealing solution for interfaces between rotating and stationary components, designed to retain oil or grease and reduce ingress of contaminants in mechanical assemblies. It features a rubber outer diameter and an elastomer sealing lip with an auxiliary non‑contacting lip and spring support to maintain effective shaft contact in polluted environments.

Features & Benefits


• Auxiliary non‑contacting lip improves contamination exclusion
• Garter spring maintains lip radial pressure for consistent sealing
• Accommodates misalignment to reduce installation stress
• High pumping rate assists Rapid lubricant circulation
• Suitable for operation from -40°C to 100°C

Applications


• Suitable for bearing housings in automation equipment
• Ideal for gearboxes handling lubricating oil or grease
• Used with rotating shafts in electrical motor assemblies
• Can be used for hydraulic pumps in mechanical systems

What maximum shaft speed can it tolerate?


It is rated for rotational speeds up to 3780 r/min under specified conditions.

How does the seal cope with short temperature spikes?


It withstands brief elevations to 120°C for intermittent operation.

What is the permitted peripheral shaft velocity?


The allowable circumferential speed is 5.34 m/s.

What pressure differential can the sealing lip handle?


The seal is specified for a pressure differential of 0.03 N/mm.

What material composes the primary sealing lip?


The lip is manufactured from nitrile rubber (NBR) to balance oil resistance and elasticity.

Gerelateerde Links