SKF Nitrile Rubber Seal, 48mm ID, 65mm OD, 10mm
- RS-stocknr.:
- 267-0283
- Fabrikantnummer:
- 48X65X10 HMSA10 RG
- Fabrikant:
- SKF
Subtotaal (1 verpakking van 10 eenheden)*
€ 19,33
(excl. BTW)
€ 23,39
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 80 stuk(s) vanaf 26 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 + | € 1,933 | € 19,33 |
*prijsindicatie
- RS-stocknr.:
- 267-0283
- Fabrikantnummer:
- 48X65X10 HMSA10 RG
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 48mm | |
| Outside Diameter | 65mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 10mm | |
| Seal Material | Nitrile Rubber | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | +100°C | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 48mm | ||
Outside Diameter 65mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 10mm | ||
Seal Material Nitrile Rubber | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature +100°C | ||
- Land van herkomst:
- CN
SKF Seal, Nitrile Rubber, 65mm Outside Diameter - 48X65X10 HMSA10 RG
This radial shaft seal from SKF features a rubber outside diameter and a single sealing lip, ideal for use with oil or grease applications. It is designed to optimise sealing against the shaft even in polluted environments, offering high pumping rate, contamination exclusion with a dust lip, and accommodating misalignment.
Features & Benefits
• High pumping rate
• Higher contamination exclusion with dust lip
• Garter spring for optimised sealing
• Accommodates misalignment
• Higher contamination exclusion with dust lip
• Garter spring for optimised sealing
• Accommodates misalignment
Applications
• Ideal for use between rotating and stationary machine components or components in relative motion
• Suitable for applications requiring a radial shaft seal with a rubber outside diameter
• Suitable for applications requiring a radial shaft seal with a rubber outside diameter
Can it be used for applications with high pumping rates and contamination concerns?
Yes, this seal is designed to offer a high pumping rate and higher contamination exclusion with a dust lip.
Will it accommodate misalignment between machine components?
Yes, it is designed to accommodate misalignment and optimise sealing against the shaft.
Is it suitable for applications with rotating and stationary machine components?
Yes, it is ideal for use between rotating and stationary machine components or components in relative motion.