SKF Nitrile Rubber Seal, 35mm ID, 60mm OD, 10mm
- RS-stocknr.:
- 267-3491
- Fabrikantnummer:
- 35X60X10 HMSA10 RG
- Fabrikant:
- SKF
Subtotaal (1 verpakking van 10 eenheden)*
€ 17,18
(excl. BTW)
€ 20,79
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 30 stuk(s) vanaf 05 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 + | € 1,718 | € 17,18 |
*prijsindicatie
- RS-stocknr.:
- 267-3491
- Fabrikantnummer:
- 35X60X10 HMSA10 RG
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 35mm | |
| Outside Diameter | 60mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 10mm | |
| Seal Material | Nitrile Rubber | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | +100°C | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 35mm | ||
Outside Diameter 60mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 10mm | ||
Seal Material Nitrile Rubber | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature +100°C | ||
- Land van herkomst:
- CN
SKF Seal, Nitrile Rubber, 60mm Outside Diameter - 35X60X10 HMSA10 RG
This radial shaft seal by SKF is designed with a rubber outside diameter and a single sealing lip, making it ideal for use with oil or grease in various machinery components. It is equipped with a garter spring and a non-contacting auxiliary lip to optimise sealing even in polluted environments.
Features & Benefits
• High pumping rate
• Higher contamination exclusion with dust lip
• Accommodates misalignment
• Rubber metal reinforced outside diameter
• Nitrile rubber sealing lip material
• Higher contamination exclusion with dust lip
• Accommodates misalignment
• Rubber metal reinforced outside diameter
• Nitrile rubber sealing lip material
Applications
• Suitable for sealing between rotating and stationary machine components
• Ideal for applications with operating temperatures ranging from -40°C to 100°C
• Recommended for circumferential speeds up to 6.39 m/s
• Ideal for applications with operating temperatures ranging from -40°C to 100°C
• Recommended for circumferential speeds up to 6.39 m/s
Will this seal perform well in polluted environments?
Yes, the garter spring and auxiliary lip design of the seal optimise sealing even in polluted conditions.
Can this seal accommodate misalignment?
Yes, the radial shaft seal is designed to accommodate misalignment between machine components.
Is this seal suitable for applications with varying temperatures?
Yes, the seal can operate in temperatures ranging from -40°C to 100°C.