Baumer, MR241 Series Encoder Wheel
- RS-stocknr.:
- 481-7650
- Fabrikantnummer:
- MR241.07D
- Fabrikant:
- Baumer
Subtotaal (1 eenheid)*
€ 48,04
(excl. BTW)
€ 58,13
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 6 stuk(s) klaar voor verzending
- 9 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 48,04 |
*prijsindicatie
- RS-stocknr.:
- 481-7650
- Fabrikantnummer:
- MR241.07D
- Fabrikant:
- Baumer
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Baumer | |
| Accessory Type | Encoder Wheel | |
| Series | MR241 | |
| Material | Plastic | |
| Wheel Circumference | 20cm | |
| Surface Pattern | Smooth | |
| Bore Size | 7mm | |
| Alles selecteren | ||
|---|---|---|
Merk Baumer | ||
Accessory Type Encoder Wheel | ||
Series MR241 | ||
Material Plastic | ||
Wheel Circumference 20cm | ||
Surface Pattern Smooth | ||
Bore Size 7mm | ||
Vrijgesteld
- Land van herkomst:
- DE
Coder accessories
Measuring wheels
Connected to coders, these easily accommodate a movement in materials, speed of movement, etc.
Smooth synthetic, striated synthetic or striated metallic coating.
Development of 20 cm/turn or 50 cm/turn.
Smooth synthetic, striated synthetic or striated metallic coating.
Development of 20 cm/turn or 50 cm/turn.
Mounting bracket Z 119.017
For standard flange coders.
Supplied with 3 no. M3 x 12 screws and 3 lock washers to fix Ø 58 coders with a centring shoulder of Ø 36 mm.
Supplied with 3 no. M3 x 12 screws and 3 lock washers to fix Ø 58 coders with a centring shoulder of Ø 36 mm.
Mounting base Z 119.015
For synchro flange coders.
The coder is fitted onto the base using 3 screws and 3 eccentrics which are ordered separately using reference Z 119.018.
The coder is fitted onto the base using 3 screws and 3 eccentrics which are ordered separately using reference Z 119.018.
Eccentrics Z 119006
For synchro flange coders.
3 eccentrics are needed to fit the coder.
3 eccentrics are needed to fit the coder.
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Short circuit protection
Age and temperature compensation