SICK Female 5 way M12 to Unterminated Unterminated Sensor Actuator Cable, 5 m

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 13,84

(excl. BTW)

€ 16,75

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks
Per stuk
1 +€ 13,84

*prijsindicatie

RS-stocknr.:
180-6359
Fabrikantnummer:
YG2A15-050VB5XLEAX
Fabrikant:
SICK
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

SICK

Product Type

Sensor Actuator Cable

Series

YG2A15

Cable Length

5m

Jacket Colour

Grey

Jacket Material

Polyvinyl Chloride

Number of Contacts A

5

Connector Gender A

Female

Connector Type A

M12

Connector Gender B

Unterminated

Connector Type B

Unterminated

Voltage

125V

IP Rating

IP65, IP66K, IP67

Standards/Approvals

CE, UL

Coding

A

Land van herkomst:
DE

Sick YG2A15 Series Sensor Actuator Cable, 5m Length, Grey Jacket - YG2A15-050VB5XLEAX


This sensor actuator cable connects M12-equipped sensors to equipment via flying leads for direct wiring in industrial systems. It is intended for sensor and actuator signal transmission in harsh environments where mechanical and chemical exposure occurs, offering a robust grey PVC outer sheath and a five-core conductor arrangement for straightforward integration into automation, electrical and mechanical installations.

Features & Benefits


• Rated for ≤125V to support low-voltage control circuits
• Five conductors with 0.34mm² cross-section for reliable signal carrying
• Ingress protection IP65/IP66K/IP67 allowing washdown and outdoor use
• Operating range −5°C to +80°C flexible during movement
• Current rating 4A to handle typical sensor loads
• Unshielded design reduces stiffness for tight routing

Applications


• Suitable for wiring proximity sensors in factory automation
• Ideal for connecting valve actuators on process equipment
• Used for linking conveyors’ detection heads to control panels
• Can be used for retrofit sensor installations in machinery
• Suitable for installations requiring M12 female to unterminated connection

What connector types are provided at each end?


One end has a 5-pin A-coded M12 female connector with angled orientation and screw termination

the opposite end is unterminated flying leads for direct field wiring.

How should the connector be torqued during installation?


The recommended tightening torque for the locking nut is 0.6 Nm and an SW13 tool is suitable for assembly.

What mechanical properties affect bend routing?


The cable diameter is 5.2mm and the minimum bending radius is greater than 10x diameter for flexing and greater than 5x diameter when stationary.

Which materials are used in the connector to resist chemicals?


The connector housing is MADE from TPU, the locking nut is nickel-plated zinc die-cast and the seal uses FKM to enhance chemical resistance.

Gerelateerde Links