Penko SGM800 Series Amplifier, Voltage Input, Digital Output, 18V dc, 32 V dc Supply
- RS-stocknr.:
- 250-7635
- Fabrikantnummer:
- 7600A10010-BLT
- Fabrikant:
- Penko
Subtotaal (1 eenheid)*
€ 956,00
(excl. BTW)
€ 1.156,76
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 09 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 956,00 |
*prijsindicatie
- RS-stocknr.:
- 250-7635
- Fabrikantnummer:
- 7600A10010-BLT
- Fabrikant:
- Penko
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Penko | |
| Product Type | Amplifier | |
| Input Signal Type | Voltage | |
| Output Signal Type | Digital | |
| Input Range | 18 → 32 V | |
| Output Range | 0 → 24 mA | |
| Supply Voltage | 18V dc, 32V dc | |
| Hazardous Area Certification | No | |
| Mount Type | DIN Rail | |
| Maximum Operating Temperature | 40°C | |
| Terminal Type | Screw | |
| Minimum Operating Temperature | -10°C | |
| IP Rating | IP20 | |
| Signal Conditioner Type | Analogue to Digital | |
| Standards/Approvals | CE | |
| Series | SGM800 | |
| Alles selecteren | ||
|---|---|---|
Merk Penko | ||
Product Type Amplifier | ||
Input Signal Type Voltage | ||
Output Signal Type Digital | ||
Input Range 18 → 32 V | ||
Output Range 0 → 24 mA | ||
Supply Voltage 18V dc, 32V dc | ||
Hazardous Area Certification No | ||
Mount Type DIN Rail | ||
Maximum Operating Temperature 40°C | ||
Terminal Type Screw | ||
Minimum Operating Temperature -10°C | ||
IP Rating IP20 | ||
Signal Conditioner Type Analogue to Digital | ||
Standards/Approvals CE | ||
Series SGM800 | ||
- Land van herkomst:
- NL
SGM820 weighing controller - Belt Weighing - Ethernet - Analog output - Digital I/O
The Penko SGM800 series product is a weighing digitizer, that offers solutions for problem free connections of strain gauge load cell based measuring, with any supervisory and control system. They all are easy DIN rail mountable and can be used as a stand alone digitizer or as a bus link system. The series also provide a wide variety in which a strain gauge signal can be digitized. They measure at high speed and have a high internal resolution, which makes it capable to do extremely accurate measurements. The wide range of available filter options helps to reduce the back ground noise to a minimum and stabilize the weighing signal.
Certified signal digitizer or amplifier
PC configurable
Easy to couple with PLC
Small on board display for trouble shooting
Communication options are RS232, RS422, Ethernet, Profinet, Profibus and analogue
Alibi memory
Controller options are filler, check weighing, belt weighing
Compact DIN rail mountable housing
Gerelateerde Links
- Penko SGM800 Series Amplifier Digital Output 32 V dc Supply
- Penko SGM700 Series Amplifier Digital Output 32 V dc Supply
- Penko FLEX2100 TFT LCD Digital Panel Multifunction Meter, 154 mm x 224 mm
- Penko 1020 LCD Digital Panel Multifunction Meter for Weight, 100 mm x 180 mm
- Penko 1020 LCD Digital Panel Multifunction Meter for Weight, 82 mm x 150 mm
- P.M.A 3RS7020 Series Signal Conditioner Signal Input 18 V ac 18V dc, 31 V dc
- Novotechnik Series MUW 200 Series Signal Conditioner 30 V dc Supply
- Motrona FU210 Series Signal Converter 30 V dc Supply