TDK Single Layer Ceramic Capacitor 10 μF 700V dc ±20 % PLZT Dielectric, CeraLink SP, Axial 150 °C Max Op. Temp.
- RS-stocknr.:
- 144-6613
- Fabrikantnummer:
- B58033I7106M001
- Fabrikant:
- TDK
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 75,78
(excl. BTW)
€ 91,69
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Laatste voorraad RS
- Laatste 5 stuk(s), klaar voor verzending vanaf een andere locatie
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 75,78 |
| 10 + | € 72,59 |
*prijsindicatie
- RS-stocknr.:
- 144-6613
- Fabrikantnummer:
- B58033I7106M001
- Fabrikant:
- TDK
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TDK | |
| Product Type | Single Layer Ceramic Capacitor | |
| Capacitance | 10μF | |
| Voltage | 700V dc | |
| Mount Type | Axial | |
| Series | CeraLink SP | |
| Tolerance | ±20 % | |
| Dielectric | PLZT | |
| Automotive Standard | AEC-Q200 | |
| Package/Case | Solder Pin | |
| Minimum Operating Temperature | -40°C | |
| Length | 33mm | |
| Height | 11.5mm | |
| Standards/Approvals | AEC-Q200 | |
| Width | 22mm | |
| Maximum Operating Temperature | 150°C | |
| Terminal Type | Solder | |
| Dissipation Factor | 0.02% | |
| Alles selecteren | ||
|---|---|---|
Merk TDK | ||
Product Type Single Layer Ceramic Capacitor | ||
Capacitance 10μF | ||
Voltage 700V dc | ||
Mount Type Axial | ||
Series CeraLink SP | ||
Tolerance ±20 % | ||
Dielectric PLZT | ||
Automotive Standard AEC-Q200 | ||
Package/Case Solder Pin | ||
Minimum Operating Temperature -40°C | ||
Length 33mm | ||
Height 11.5mm | ||
Standards/Approvals AEC-Q200 | ||
Width 22mm | ||
Maximum Operating Temperature 150°C | ||
Terminal Type Solder | ||
Dissipation Factor 0.02% | ||
- Land van herkomst:
- AT
High ripple current capability
High temperature robustness
Low equivalent serial inductance (ESL)
Low equivalent serial resistance (ESR)
Low power loss
Low dielectric absorption
Optimized for high frequencies up to several MHz
Increasing capacitance with DC bias up to operating voltage
High capacitance density
Minimized dielectric loss at high temperatures
Qualification based on AEC-Q200 rev. D
Suitable for reflow soldering only
Gerelateerde Links
- TDK Single Layer Ceramic Capacitor 10 μF 700V dc ±20 % PLZT Dielectric Axial 150 °C Max Op. Temp.
- TDK Single Layer Ceramic Capacitor (SLCC) 5μF 900V dc ±20% PLZT Dielectric Axial +150°C Max Op. Temp.
- KEMET Single Layer Ceramic Capacitor 6.8 nF 250V ac ±20 % Y5V Dielectric, C900 125 °C Max Op. Temp.
- Murata Single Layer Ceramic Capacitor 470 pF ±10 % B Dielectric Through Hole 125 °C Max Op. Temp.
- Murata Single Layer Ceramic Capacitor 680 pF ±10 % B Dielectric Through Hole 125 °C Max Op. Temp.
- Murata Single Layer Ceramic Capacitor 330 pF ±10 % B Dielectric Through Hole 125 °C Max Op. Temp.
- Murata Single Layer Ceramic Capacitor 220 pF ±10 % B Dielectric Through Hole 125 °C Max Op. Temp.
- Murata Single Layer Ceramic Capacitor 100 pF ±10 % B Dielectric Through Hole 125 °C Max Op. Temp.