RS PRO Blue Polyethylene Solder Sleeve 29.3mm Length 4.5 mm Cable Diameter 2.3 mm Cable Diameter

The size 2 solder sleeve is made from transparent low-density polyethylene for easy inspection. It comes with a pre-fluxed solder and hot-melt glue at either end, giving you easy control of the soldering process. When you place the sleeve over a wire and apply heat to seal it to another wire, the sleeve shrinks and the glue melts for an insulated, strain-free connection. This product can withstand temperatures as low as -55°C and as high as +125°C.

You can use this solder sleeve to terminate wires and cables ranging from 2.3 mm to 4.5 mm in diameter. Thanks to its tolerance of extreme temperatures and its moisture-resistant hot-melt glue, it offers protection to terminations in a wide range of industrial environments.

• Size 2

• Transparent low-density polyethylene material

• Minimum cable diameter of 2.3 mm

• Maximum cable diameter of 4.5 mm

• Length of 29.3 mm

• Dielectric strength of 1 kV

• Minimum operating temperature of -55°C

• Maximum operating temperature of +125°C

• Shrink temperature of +115°C

• Blue in colour