RS PRO Wire, 0.7 mm Lead Solder, 183 °C Melting Point
- RS-stocknr.:
- 179-6685
- Fabrikant:
- RS PRO
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 27,20
(excl. BTW)
€ 32,91
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 52 stuk(s) vanaf 20 april 2026
- Plus verzending 4 stuk(s) vanaf 22 april 2026
- Plus verzending 18 stuk(s) vanaf 27 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 27,20 |
| 10 - 19 | € 26,14 |
| 20 - 49 | € 25,31 |
| 50 + | € 23,24 |
*prijsindicatie
- RS-stocknr.:
- 179-6685
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Wire Diameter | 0.7mm | |
| Product Type | Lead Solder | |
| Percent Lead | 40% | |
| Product Form | Wire | |
| Melting Point | 183°C | |
| Percent Tin | 60% | |
| Flux Type | Water Soluble | |
| Product Weight | 250g | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Wire Diameter 0.7mm | ||
Product Type Lead Solder | ||
Percent Lead 40% | ||
Product Form Wire | ||
Melting Point 183°C | ||
Percent Tin 60% | ||
Flux Type Water Soluble | ||
Product Weight 250g | ||
Standards/Approvals No | ||
Niet conform
- Land van herkomst:
- US
RS PRO 0.7 mm Lead Solder, +183°C Melting Point
Looking for a fine-wire fusing solution you can use to create a reliable permanent connection between your electronic devices? This RS PRO solder has a water-soluble flux that ensures clean surfaces for optimal soldering.
The product has a low melting point so you'll get excellent wetting action and solder spread to ensure the efficient bonding of the alloy to your desired metal surface. The solder's combination of tin and lead means it creates a joint that won't flake or loosen when the surface is exposed to tension. This also means that you can apply prolonged heat without decomposing or carbonising the flux.
This product contains lead that can be harmful to human health, so it should only be used by professionals under controlled conditions. It's commonly used for the manufacture or mending of delicate electronic components.
Features and Benefits
• 3.3% flux content
• Water-soluble flux type
• Melting point of +183°C
• 40% lead
• 60% tin
• Wire product form
• Product weight of 250 g
• Wire diameter of 0.7 mm