Weller HT HX 0.8 mm Bent Conical 51.5 mm Soldering Iron Tip for use with WXP120, WP120
- RS-stocknr.:
- 199-036
- Fabrikantnummer:
- T0054473799
- Fabrikant:
- Weller
Subtotaal (1 eenheid)*
€ 12,79
(excl. BTW)
€ 15,48
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 12 stuk(s) klaar voor verzending
- 112 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 12,79 |
*prijsindicatie
- RS-stocknr.:
- 199-036
- Fabrikantnummer:
- T0054473799
- Fabrikant:
- Weller
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Weller | |
| Tip Shape | Bent Conical | |
| Model Number | HT HX | |
| Product Type | Soldering Iron Tip | |
| For Use With | WXP120, WP120 | |
| Tip Series | XT | |
| Tip Width | 0.8 mm | |
| Tip Length | 51.5mm | |
| Standards/Approvals | UPC | |
| Alles selecteren | ||
|---|---|---|
Merk Weller | ||
Tip Shape Bent Conical | ||
Model Number HT HX | ||
Product Type Soldering Iron Tip | ||
For Use With WXP120, WP120 | ||
Tip Series XT | ||
Tip Width 0.8 mm | ||
Tip Length 51.5mm | ||
Standards/Approvals UPC | ||
- Land van herkomst:
- BA
Weller Soldering Iron Tip, 51.5mm Tip Length, 0.8mm Tip Width - T0054473799
This soldering iron tip provides a precision heat-transfer solution for fine electronic soldering tasks. Designed to replace worn tips in compatible Weller stations, it offers a specific angled profile for access to confined joints and controlled thermal delivery appropriate for component-level repairs and assembly work.
Features and Benefits:
• Bent conical profile improves access to tight joints
• Narrow 0.8mm tip enables fine solder deposition
• Durable finish maintains thermal conductivity under repeated use
• Compatible with designated iron models for straightforward replacement
• 51.5mm length offers reach for recessed components
• Narrow 0.8mm tip enables fine solder deposition
• Durable finish maintains thermal conductivity under repeated use
• Compatible with designated iron models for straightforward replacement
• 51.5mm length offers reach for recessed components
Applications
• Suitable for precise SMD component soldering
• Ideal for electronics repair and refurbishment tasks
• Used with WXP120 compatible replacement tip fittings
• Can be used for detailed connector and pin work
• Appropriate for workshop and bench-level maintenance
• Ideal for electronics repair and refurbishment tasks
• Used with WXP120 compatible replacement tip fittings
• Can be used for detailed connector and pin work
• Appropriate for workshop and bench-level maintenance
Which irons will accept this replacement element?
It fits specified compatible Weller stations designed for replaceable tips and mates directly with the matching heater assembly on those models.
How does the bent conical geometry affect soldering technique?
The angled conical shape permits approach to side-facing joints and enables controlled wetting on small pads without excessive contact area.
What should be considered when changing to this tip?
Ensure the station is powered down and cooled, verify seating on the heater barrel, and confirm mechanical retention to maintain thermal transfer.
Is this tip suitable for precision measurement tasks during rework?
Its fine 0.8mm point supports accurate solder deposition and reduces thermal spread, assisting precise rework and measurement-sensitive operations.
Gerelateerde Links
- Weller XT AX 30 1.6 mm Bent Screwdriver Soldering Iron Tip for use with WP120, WXP120
- Weller XT BS 2.4 mm Conical 36.5 mm Soldering Iron Tip for use with WXP120, WP120
- Weller XT CS 3.2 mm Conical 36.5 mm Soldering Iron Tip for use with WP120, WXP120
- Weller XT O 1 mm Conical 37 mm Soldering Iron Tip for use with WXP120, WP120
- Weller XT RA 1.6 x 0.7mm Screwdriver Soldering Iron Tip for use with WP120, WXP120
- Weller XT AL 1.6 mm Screwdriver 40 mm Soldering Iron Tip for use with WXP120, WP120
- Weller XT D 45 5 mm Screwdriver Soldering Iron Tip for use with WP120, WXP120
- Weller XT GW3 0.8 mm Gull Wing Soldering Iron Tip for use with WXP120, WP120
