Omron G3VM Series PCB Mount Solid State Relays, 200 mA Load, Surface Mount Mount, 80 V Load

RS-stocknr.:: 685-253
Fabrikantnummer:: G3VM1139M
Fabrikant:: Omron

Omron G3VM Series PCB Mount Solid State Relays, 200 mA Load, Surface Mount Mount, 80 V Load

Momenteel niet beschikbaar

We weten niet of dit artikel weer voorradig zal zijn, het wordt door de fabrikant stopgezet.

RS-stocknr.:: 685-253
Fabrikantnummer:: G3VM1139M
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Product Type	PCB Mount Solid State Relays
	Maximum Load Current	200mA
	Mount Type	Surface Mount
	Maximum Load Voltage	80V
	Series	G3VM
	Terminal Type	Surface Mount
	Contact Configuration	1a (SPST-NO)
	On State Resistance	1Ω
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	85°C
	Package Type	4-Pin SOP
	Width	4.4mm
	Standards/Approvals	UL
	Length	2.54mm
	Height	3.9mm
	Output Type	FET
	Capacitance	15pF
	Off State Leakage Current	1nA

	Alles selecteren
	Merk Omron
	Product Type PCB Mount Solid State Relays
	Maximum Load Current 200mA
	Mount Type Surface Mount
	Maximum Load Voltage 80V
	Series G3VM
	Terminal Type Surface Mount
	Contact Configuration 1a (SPST-NO)
	On State Resistance 1Ω
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 85°C
	Package Type 4-Pin SOP
	Width 4.4mm
	Standards/Approvals UL
	Length 2.54mm
	Height 3.9mm
	Output Type FET
	Capacitance 15pF
	Off State Leakage Current 1nA

Datasheet - G3VM1139M

Land van herkomst:: JP

Omron G3VM Series PCB Mount Solid State Relays, 200mA Maximum Load Current, 80V Maximum Load Voltage - G3VM1139M

This PCB-mount solid-state relay provides a compact, surface-mounted switching solution for low-current DC circuits in industrial and electronic control environments. Designed for printed circuit board assembly, it uses a semiconductor output stage to perform single-pole single-throw normally open switching with minimal mechanical wear, making it suitable for frequent switching in automated systems.

Features and Benefits:

• 80V maximum load voltage enables moderate-voltage DC switching
• 200 mA maximum load current supports low-power control circuits
• 1 nA off-state leakage reduces unintended current draw
• 1 Ω on-state resistance minimises voltage drop during conduction
• 15 pF capacitance limits noise and crosstalk between terminals
• UL approval confirms recognised safety assessment for use

Applications

• Suitable for signal switching in factory automation controllers
• Ideal for interfacing sensors to control electronics
• Used for low-current power distribution in instrumentation
• Can be used for PCB-mounted relay replacement in Compact devices
• Used with driver ICs in industrial monitoring modules

What mounting method is required for PCB assembly?

The device uses a surface-mount Terminal style in a 4-pin SOP package for reflow soldering on standard pads.

How does the thermal environment affect operation?

Rated to operate between -20 °C and 85 °C, it maintains switching characteristics across typical industrial temperature ranges.

What type of semiconductor is used for the output?

The output stage employs a FET topology to provide solid-state conduction and fast switching performance.

How small is the component footprint for dense boards?

The package measures 2.54mm by 4.4mm with a height of 3.9 mm, allowing tight placement on populated PCBs.