Dold BF9250 Series Solid State Relay, 15 A Load, Top Hat Rail Mount, 280 V Load, 48V Control
- RS-stocknr.:
- 375-5179
- Fabrikantnummer:
- BF9250.03/001 UH=DC24V 3xAC15A AC24-480V
- Fabrikant:
- Dold
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 389,92
(excl. BTW)
€ 471,80
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 20 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 389,92 |
*prijsindicatie
- RS-stocknr.:
- 375-5179
- Fabrikantnummer:
- BF9250.03/001 UH=DC24V 3xAC15A AC24-480V
- Fabrikant:
- Dold
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Dold | |
| Maximum Load Current | 15A | |
| Product Type | Solid State Relay | |
| Mount Type | Top Hat Rail | |
| Maximum Load Voltage | 280V | |
| Minimum Load Voltage | 24V dc | |
| Minimum Control Voltage | 3V | |
| Maximum Control Voltage | 48V | |
| Series | BF9250 | |
| Terminal Type | Cage Clamp | |
| IP Rating | IP40, IP20 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 40°C | |
| Width | 120 mm | |
| Height | 90mm | |
| Length | 85mm | |
| Off State Leakage Current | 1mA | |
| Alles selecteren | ||
|---|---|---|
Merk Dold | ||
Maximum Load Current 15A | ||
Product Type Solid State Relay | ||
Mount Type Top Hat Rail | ||
Maximum Load Voltage 280V | ||
Minimum Load Voltage 24V dc | ||
Minimum Control Voltage 3V | ||
Maximum Control Voltage 48V | ||
Series BF9250 | ||
Terminal Type Cage Clamp | ||
IP Rating IP40, IP20 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 40°C | ||
Width 120 mm | ||
Height 90mm | ||
Length 85mm | ||
Off State Leakage Current 1mA | ||
- Land van herkomst:
- MT
Semiconductor contactor
Semiconductor contactors for wear-free, silent switching of AC loads such as heating, motors, valves and lighting
The cost of investing in this new technology is quickly recovered where high switching rates are used
Zero-voltage switching to prevent feedback to the main power grid
Integrated temperature monitoring ensures the device is protected from damage caused by excess current
In accordance with EN 60 947-4-2, IEC 60 158-2, VDE 0660 part 109
Single-phase or 3-phase design
Control input X1 with low power consumption, e.g. for PLC control
High switching frequency coupled with long service life
Compact construction with integrated heat sink
For switching AC loads up to 480 V
Protection circuit with varistors
Temperature monitoring via LED display and semiconductor output (memory preservation)
3 LED displays
Top-hat rail mounting
Semiconductor Contactors
A range of complete ’ready to use’ devices that comprise relay and heat sink in one compact DIN rail mountable unit. Typical applications include control of non motor loads where high operating frequencies are encountered.