Broadcom ASSR-1218 Series Solid State Relay, 200 mA Load, Surface Mount, 60 V Load, 800mV Control
- RS-stocknr.:
- 696-1241P
- Fabrikantnummer:
- ASSR-1218-003E
- Fabrikant:
- Broadcom
Ontvang bulkkorting
Voeg 40 meer toe om € 8,40 te besparen
Bekijk bulkkortingSubtotaal 10 eenheden (geleverd in een buis)*
€ 19,65
(excl. BTW)
€ 23,78
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 7.770 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Bespaar |
|---|---|---|
| 10 - 38 | € 1,965 | - |
| 40 - 98 | € 1,755 | € 8,40 |
| 100 - 198 | € 1,58 | € 38,50 |
| 200 + | € 1,47 | € 99,00 |
*prijsindicatie
- RS-stocknr.:
- 696-1241P
- Fabrikantnummer:
- ASSR-1218-003E
- Fabrikant:
- Broadcom
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Broadcom | |
| Maximum Load Current | 200mA | |
| Product Type | Solid State Relay | |
| Mount Type | Surface | |
| Maximum Load Voltage | 60V | |
| Minimum Load Voltage | -60V | |
| Maximum Control Voltage | 800mV | |
| Minimum Control Voltage | 1.1V | |
| Series | ASSR-1218 | |
| Terminal Type | 4-Pin | |
| Contact Configuration | SPST | |
| On State Resistance | 1Ω | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Width | 4.4mm | |
| Standards/Approvals | IEC, RoHS, CSA, UL | |
| Height | 2mm | |
| Length | 4.3mm | |
| Capacitance | 0.4pF | |
| Off State Leakage Current | 1μA | |
| Output Type | MOSFET | |
| Alles selecteren | ||
|---|---|---|
Merk Broadcom | ||
Maximum Load Current 200mA | ||
Product Type Solid State Relay | ||
Mount Type Surface | ||
Maximum Load Voltage 60V | ||
Minimum Load Voltage -60V | ||
Maximum Control Voltage 800mV | ||
Minimum Control Voltage 1.1V | ||
Series ASSR-1218 | ||
Terminal Type 4-Pin | ||
Contact Configuration SPST | ||
On State Resistance 1Ω | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Width 4.4mm | ||
Standards/Approvals IEC, RoHS, CSA, UL | ||
Height 2mm | ||
Length 4.3mm | ||
Capacitance 0.4pF | ||
Off State Leakage Current 1μA | ||
Output Type MOSFET | ||
Broadcom ASSR-1218 Series Solid State Relay, 60V Maximum Load Voltage, 0.2A Maximum Load Current - ASSR-1218-003E
This solid-state relay is a Compact electronic switching component designed to control DC loads with semiconductor output devices. It operates within a broad temperature range and is intended for surface-mounted applications where fast switching and minimal signal disturbance are required in electronic assemblies.
Features and Benefits:
• MOSFET output enables low conduction loss and efficient switching
• 1Ω on-resistance provides minimal voltage drop during conduction
• 1μA off-state leakage minimises standby power draw
• 0.4pF capacitance reduces switching-induced signal coupling
• 0.2A maximum load current suits low-current control circuits
• -40°C to 85°C operating range supports varied ambient conditions
• 1Ω on-resistance provides minimal voltage drop during conduction
• 1μA off-state leakage minimises standby power draw
• 0.4pF capacitance reduces switching-induced signal coupling
• 0.2A maximum load current suits low-current control circuits
• -40°C to 85°C operating range supports varied ambient conditions
Applications
• Used with battery management and portable power control circuits
• Suitable for signal routing in precision measurement systems
• Ideal for low-current telecommunications line switching
• Can be used for industrial control logic interfacing
• Used for miniature relay replacement on densely populated boards
• Suitable for signal routing in precision measurement systems
• Ideal for low-current telecommunications line switching
• Can be used for industrial control logic interfacing
• Used for miniature relay replacement on densely populated boards
What control-voltage range does it require to switch reliably?
The input accepts control voltages beginning at 1.1V for activation and recognises up to 0.8V on the control path as the upper specified limit for operational characteristics.
How does the device behave under reverse load voltage conditions?
It tolerates negative load voltages down to -60V while maintaining off-state performance within specified leakage parameters.
What package and Terminal arrangement should designers anticipate for PCB layout?
It is supplied as a surface-mount 4-pin device with an SPST contact configuration suitable for Compact SMD placement.
Which safety and environmental standards are met for regulatory assessment?
The component conforms to IEC, RoHS, CSA and UL approvals relevant to electronic switching parts.