IXYS CPC1988J Series Solid State Relay, 9.4 Arms Load, PCB Mount, 1000 V Load, 5V Control

Bekijk alle Solid State Relays
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
RS-stocknr.:
906-1108
Fabrikantnummer:
CPC1988J
Fabrikant:
IXYS
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

IXYS

Product Type

Solid State Relay

Maximum Load Current

9.4Arms

Mount Type

PCB

Maximum Load Voltage

1000V

Maximum Control Voltage

5V

Series

CPC1988J

Terminal Type

PCB Terminal

Contact Configuration

SPST

On State Resistance

2.5Ω

Minimum Operating Temperature

-40°C

Switching Function

No zero cross

Package Type

ISOPLUS264

Maximum Operating Temperature

85°C

Width

19.914 mm

Length

19.9mm

Standards/Approvals

UL508

Height

26.2mm

Off State Leakage Current

1μA

Capacitance

540pF

Land van herkomst:
PH

1-Form-A OptoMOS Power Relay, CPC


These single pole solid state relays have normally open (1-Form-A) contacts. They feature a unique ISOPLUS-264 package giving the highest possible load current and power ratings. They are able to provide 2500 Vrms of input to output isolation by utilising optically coupled MOSFET technology.

The optically coupled outputs use the well-known OptoMOS architecture and are controlled by a highly efficient infrared LED. With a low on-resistance and a high load current rating these units are suitable for a wide variety of applications.

The unique ISOPLUS-264 package is manufactured with the silicon chip being soft soldered onto the Direct Copper Bond (DCB) substrate rather than the traditional copper lead frame. These DCB ceramics are what makes it possible to provide 2500 Vrms isolation but still offer a very low junction-to-case thermal resistance from only 0.3C per watt.

Potential Applications:

Industrial controls/motor control

Robotics

Medical equipment: Patient/equipment isolation

Instrumentation: Multiplexers, data acquisition, electronic switching and I/O subsystems

Energy meters

Transportation equipment

Aerospace/defence

Features

2.25 Arms load current with 5°C per watt heat sink

Low on-resistance

Selection of blocking voltages

2500 Vrms input/output isolation

Low thermal resistance

Isolated, low thermal impedance ceramic pad for heat sink applications

Low drive power requirements

Arc-free with no snubbing circuits

No EMI/RFI generation

Machine insertable, wave solderable

Ixys Solid State Relays, PCB Mount


Standards

UL 508 Certified Component: File E69938

Gerelateerde Links