United Automation, PIR Controller Space Heater PIR Controller for use with IR Heaters

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Infresco 4KW PIR Soft-Start Controller P-4kW

The infresco-P 4kW is part of a family of controllers that is designed to provide energy saving when used with Quartz Infrared Halogen Lamps. The unit has a built in PIR sensor allowing the lamps to automatically switch on only when people are present. In addition to the PIR, a temperature sensor monitors the outside temperature and inhibits the lamps when the
temperature exceeds a pre-determined set point of between 1 and 40 degrees Celsius.
The microcontroller-based system incorporates Zero-Voltage switching and a Soft-Start function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. The lamps are switched on for a fixed time period of 5 minutes. This period is reset each time the PIR detects any further movement. Once installed is relatively
maintenance free.

Significant energy saving - provides heat only when people are present
Extends lamp Life
Temperature monitor – lamps inhibited when ambient temperature exceeds set point
Soft-Start / Zero-Voltage switch-off
Easy to install

Power Controller Accessories

Specificaties
Kenmerk Waarde
Accessory Type PIR Controller
For Use With IR Heaters
Model Number Infresco-P 4kW
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13-03-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
106,05
(excl. BTW)
128,32
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 106,05
5 - 9
€ 104,13
10 - 24
€ 99,86
25 +
€ 91,67
Related Products
The PLX200E is a Lot 20 compliant, modern ...
Description:
The PLX200E is a Lot 20 compliant, modern and efficient electric panel heater. Offering intuitive controls with multiple timers, natural white colour and louvered grille, this heater will fit naturally into any room. The PLXE range is a great choice ...
The Dimplex panel heater works on 1.5kW maximum ...
Description:
The Dimplex panel heater works on 1.5kW maximum output power source. This is a modern, efficient and easy-to-use heater. It has multiple timers, louvered grille and available in natural white colour. This heater has a cap sense controller with backlit ...
The Dimplex panel heater requires 1.25kW maximum output ...
Description:
The Dimplex panel heater requires 1.25kW maximum output power source. This is a modern, efficient and easy-to-use heater. It has multiple timers, louvered grille and available in natural white colour. This heater has a cap sense controller with backlit LCD ...
A range of very robust wall mounted fan ...
Description:
A range of very robust wall mounted fan heaters designed to be used in warehouses, workshops and other industrial environments. Multi directional wall bracket fittedA fan over-run function keeps the fan runnng for a short time to cool the heating ...