TE Connectivity DuraSeal Red Insulated Female Spade Connector, Crimp, 6.35 x 0.8 mm Tab Size 22 AWG to 18 AWG

RS-stocknr.:: 163-8753
Fabrikantnummer:: B-106-4631
Fabrikant:: TE Connectivity

TE Connectivity DuraSeal Red Insulated Female Spade Connector, Crimp, 6.35 x 0.8 mm Tab Size 22 AWG to 18 AWG

Subtotaal (1 doos van 1000 eenheden)*

€ 743,73

(excl. BTW)

€ 899,91

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 04 februari 2027

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Dozen	Per Doos	Per stuk*
1 +	€ 743,73	€ 0,744

*prijsindicatie

RS-stocknr.:: 163-8753
Fabrikantnummer:: B-106-4631
Fabrikant:: TE Connectivity

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	TE Connectivity
	Termination Type	Crimp
	Product Type	Spade Connector
	Gender	Female
	Tab Size	6.35 x 0.8 mm
	Tab Thickness	0.032in
	Tab Width	0.25in
	Insulation	Insulated
	Maximum Wire Size mm²	0.9mm²
	Minimum Wire Size mm²	0.3mm²
	Minimum Wire Size AWG	22AWG
	Maximum Wire Size AWG	18AWG
	Colour	Red
	Contact Material	Brass
	Contact Plating	Tin
	Orientation	Straight
	Insulation Material	Nylon
	Standards/Approvals	UL listed component, file E87681 (butt splices and terminals except quick connect terminals), file E157833 (quick connect terminals)
	Overall Length	1.85in
	Series	DuraSeal

	Alles selecteren
	Merk TE Connectivity
	Termination Type Crimp
	Product Type Spade Connector
	Gender Female
	Tab Size 6.35 x 0.8 mm
	Tab Thickness 0.032in
	Tab Width 0.25in
	Insulation Insulated
	Maximum Wire Size mm² 0.9mm²
	Minimum Wire Size mm² 0.3mm²
	Minimum Wire Size AWG 22AWG
	Maximum Wire Size AWG 18AWG
	Colour Red
	Contact Material Brass
	Contact Plating Tin
	Orientation Straight
	Insulation Material Nylon
	Standards/Approvals UL listed component, file E87681 (butt splices and terminals except quick connect terminals), file E157833 (quick connect terminals)
	Overall Length 1.85in
	Series DuraSeal

Land van herkomst:: MX

TEConnectivity Crimp Receptacles

The TEConnectivity DuraSeal red insulated crimp receptacle is designed to terminate a tin-plated or bare copper stranded wire having insulation rated or at least 75C to a blade terminal. It will provide a splash-proof and strain relief connection.

Features and Benefits:

• Operating temperature ranges between -55°C and 125°C

• Heat-shrinkable

• Blade terminal: tin plated brass

• Insulated receptacle

• Gender: Male

• Free hanging mount

Applications:

• Tooling

• Installation

Certifications:

• UL approved

Waterproof Duraseal terminals

Crimp terminals pre-installed in a heat shrinkable sleeve coated with a hot melt adhesive to make them waterproof.

The connection, insulation and waterproofing are carried out through shrinking after crimping.

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important

• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed