TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 10 AWG
- RS-stocknr.:
- 533-667
- Fabrikantnummer:
- DS-14-16-RS
- Fabrikant:
- TE Connectivity
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 verpakking van 50 eenheden)*
€ 24,55
(excl. BTW)
€ 29,70
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 7.700 stuk(s) vanaf 18 maart 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 50 - 200 | € 0,491 | € 24,55 |
| 250 - 1200 | € 0,452 | € 22,60 |
| 1250 - 2450 | € 0,403 | € 20,15 |
| 2500 - 4950 | € 0,369 | € 18,45 |
| 5000 + | € 0,344 | € 17,20 |
*prijsindicatie
- RS-stocknr.:
- 533-667
- Fabrikantnummer:
- DS-14-16-RS
- Fabrikant:
- TE Connectivity
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TE Connectivity | |
| Product Type | Splice Connector | |
| Splice Type | Butt | |
| Overall Length | 36mm | |
| Diameter | 4.6mm | |
| Minimum Wire Size AWG | 12AWG | |
| Insulation | Insulated | |
| Maximum Wire Size AWG | 10AWG | |
| Colour | Blue | |
| Insulation Material | Nylon | |
| Series | DuraSeal | |
| Contact Material | Copper | |
| Contact Plating | Tin | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk TE Connectivity | ||
Product Type Splice Connector | ||
Splice Type Butt | ||
Overall Length 36mm | ||
Diameter 4.6mm | ||
Minimum Wire Size AWG 12AWG | ||
Insulation Insulated | ||
Maximum Wire Size AWG 10AWG | ||
Colour Blue | ||
Insulation Material Nylon | ||
Series DuraSeal | ||
Contact Material Copper | ||
Contact Plating Tin | ||
Standards/Approvals No | ||
- Land van herkomst:
- MX
Blue 16 → 14 AWG
Features and Benefits:
Colour is blue - colour coded for easy identification of gauge sizes
Maximum wire size 2.0mm Dia.
1.5 to 2.5mm² CSA
Resistance to moisture and abrasion
Strain relief
Protection from wire pull out
Easy to install
Materials:
Insulative sleeve - polyamide with thermoplastic adhesive coating inside
Crimp splice – Tin plated copper alloy
Base metal – Copper
Applications:
These splice connectors are designed to splice tin plated or bare copper stranded wires with an insulation rated for at least 85 degrees C. Can be found in areas such as:
Automotive
Commercial wiring
Marine electronics
Splices
Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed