TE Connectivity, D-436 Crimp Splice Connector, Blue, Yellow, Red, Insulated, Tin 12 AWG
- RS-stocknr.:
- 136-4676
- Fabrikantnummer:
- D-436-38
- Fabrikant:
- TE Connectivity
Subtotaal (1 verpakking van 10 eenheden)*
€ 36,77
(excl. BTW)
€ 44,49
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 50 stuk(s) vanaf 14 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 + | € 3,677 | € 36,77 |
*prijsindicatie
- RS-stocknr.:
- 136-4676
- Fabrikantnummer:
- D-436-38
- Fabrikant:
- TE Connectivity
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TE Connectivity | |
| Splice Type | Crimp | |
| Product Type | Splice Connector | |
| Overall Length | 27.94mm | |
| Diameter | 4.32mm | |
| Minimum Wire Size AWG | 16AWG | |
| Minimum Wire Size mm² | 1.19mm² | |
| Insulation | Insulated | |
| Maximum Wire Size mm² | 3.37mm² | |
| Maximum Wire Size AWG | 12AWG | |
| Colour | Blue, Yellow, Red | |
| Insulation Material | Polyvinyl Fluoride | |
| Series | D-436 | |
| Contact Material | Copper Alloy | |
| Termination Type | Crimp | |
| Contact Plating | Tin | |
| Standards/Approvals | SAE AS81824/1 | |
| Alles selecteren | ||
|---|---|---|
Merk TE Connectivity | ||
Splice Type Crimp | ||
Product Type Splice Connector | ||
Overall Length 27.94mm | ||
Diameter 4.32mm | ||
Minimum Wire Size AWG 16AWG | ||
Minimum Wire Size mm² 1.19mm² | ||
Insulation Insulated | ||
Maximum Wire Size mm² 3.37mm² | ||
Maximum Wire Size AWG 12AWG | ||
Colour Blue, Yellow, Red | ||
Insulation Material Polyvinyl Fluoride | ||
Series D-436 | ||
Contact Material Copper Alloy | ||
Termination Type Crimp | ||
Contact Plating Tin | ||
Standards/Approvals SAE AS81824/1 | ||
- Land van herkomst:
- MX
TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp Splices
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is critical. MiniSeal splices consist of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve. The insulation sleeve provides environmental protection to the electrical connection against liquids such as hydraulic fluid, aviation fuel and lubrication fluids and the resulting chemical and galvanic corrosion. The heat-shrinkable sleeve also provides strain relief for the splice. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft, aerospace vehicles and similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used.
Features and Benefits
Small and lightweight design
Easy one-step installation
Immersion resistant
Environmentally sealed against liquid penetration and resulting corrosion
Suitable for use in harsh environments
MIL spec M8184/1 versions available
Applications
These MiniSeal immersion resistant crimp splices are suitable for use in harsh environments within the aerospace and defence industries
Approvals
MIL-S-81824/1
Standards
MIL-S-81824/1