TE Connectivity, 650 Butt Splice Connector, Red, Insulated, Nickel 16 AWG
- RS-stocknr.:
- 164-8394
- Artikelnummer Distrelec:
- 304-52-253
- Fabrikantnummer:
- 650126-000
- Fabrikant:
- TE Connectivity
Subtotaal (1 doos van 100 eenheden)*
€ 536,30
(excl. BTW)
€ 648,90
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 200 stuk(s) vanaf 30 november 2026
- Plus verzending 100 stuk(s) vanaf 07 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per Doos* |
|---|---|---|
| 100 + | € 5,363 | € 536,30 |
*prijsindicatie
- RS-stocknr.:
- 164-8394
- Artikelnummer Distrelec:
- 304-52-253
- Fabrikantnummer:
- 650126-000
- Fabrikant:
- TE Connectivity
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TE Connectivity | |
| Splice Type | Butt | |
| Product Type | Splice Connector | |
| Overall Length | 27.94mm | |
| Minimum Wire Size AWG | 20AWG | |
| Diameter | 2.03mm | |
| Maximum Wire Size AWG | 16AWG | |
| Insulation | Insulated | |
| Colour | Red | |
| Insulation Material | Modified Polyvinylidene | |
| Series | 650 | |
| Contact Material | Copper Alloy | |
| Termination Type | Crimp | |
| Contact Plating | Nickel | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk TE Connectivity | ||
Splice Type Butt | ||
Product Type Splice Connector | ||
Overall Length 27.94mm | ||
Minimum Wire Size AWG 20AWG | ||
Diameter 2.03mm | ||
Maximum Wire Size AWG 16AWG | ||
Insulation Insulated | ||
Colour Red | ||
Insulation Material Modified Polyvinylidene | ||
Series 650 | ||
Contact Material Copper Alloy | ||
Termination Type Crimp | ||
Contact Plating Nickel | ||
Standards/Approvals No | ||
- Land van herkomst:
- MX
TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp In-Line Butt Splices
MiniSeal high performance immersion-resistant crimp in-line butt splices consisting of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve made from radiation cross-linked polyvinylidene fluoride. These MiniSeal™ crimp splices are environmentally sealed and maintain the quality of the electrical connection and seal the splice against corrosion, galvanic action over time and exposure to harsh environments. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft and aerospace vehicles, or similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used
For wire sizes and splice configurations please see table.