RS PRO, BNT Butt Splice Connector, Silver, Uninsulated, Tin 14 AWG
- RS-stocknr.:
- 178-7200
- Fabrikant:
- RS PRO
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 zak van 100 eenheden)*
€ 11,40
(excl. BTW)
€ 13,80
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 200 stuk(s) klaar voor verzending
- 3.700 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per Zak* |
|---|---|---|
| 100 - 900 | € 0,114 | € 11,40 |
| 1000 - 1900 | € 0,105 | € 10,50 |
| 2000 - 4900 | € 0,096 | € 9,60 |
| 5000 - 9900 | € 0,088 | € 8,80 |
| 10000 + | € 0,079 | € 7,90 |
*prijsindicatie
- RS-stocknr.:
- 178-7200
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Product Type | Splice Connector | |
| Splice Type | Butt | |
| Overall Length | 16mm | |
| Diameter | 3.9mm | |
| Minimum Wire Size mm² | 1.5mm² | |
| Minimum Wire Size AWG | 16AWG | |
| Insulation | Uninsulated | |
| Maximum Wire Size mm² | 2.5mm² | |
| Maximum Wire Size AWG | 14AWG | |
| Colour | Silver | |
| Series | BNT | |
| Contact Material | Copper | |
| Contact Plating | Tin | |
| Thickness | 0.8mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Product Type Splice Connector | ||
Splice Type Butt | ||
Overall Length 16mm | ||
Diameter 3.9mm | ||
Minimum Wire Size mm² 1.5mm² | ||
Minimum Wire Size AWG 16AWG | ||
Insulation Uninsulated | ||
Maximum Wire Size mm² 2.5mm² | ||
Maximum Wire Size AWG 14AWG | ||
Colour Silver | ||
Series BNT | ||
Contact Material Copper | ||
Contact Plating Tin | ||
Thickness 0.8mm | ||
Standards/Approvals No | ||
- Land van herkomst:
- TW
RS PRO Splice Connector 1.5 → 2.5 mm², 16 → 14 AWG
Need a quick and easy way to mate, repair or lengthen wires then choose this butt splice connector from RS PRO. Simply insert the wires into the holes on the sides of the splice and squeeze down on each side of the indentation using a crimper. This achieves a safe and reliable cable connection with no need for soldering.
This splice connector is also used to terminate single wires efficiently. Using an adhesive heat shrink over these units provides insulation, enhances device safety and reduces current leakage. Robust construction ensures the unit doesn't split when crimped and also protects from wire pull-outs.
This unit is stringently tested for durability and quality. Non-insulated butt splice terminals are useful for most general cabling applications, where there is minimal chance of short-circuiting, such as in small electric devices.
Features and Benefits
Small Pack Size
Per Unit, RS stock no: 178-7200
Large Pack Size
RS stock no: 270-7453