RS PRO Butt Splice Splice Connector, Silver, Tin 16 → 22 AWG
- RS-stocknr.:
- 270-7451
- Fabrikant:
- RS PRO
25000 op voorraad - levertijd is 1 werkdag(en).
Geschatte totale prijs (1000 Aantal stuks)
€ 72,00
(excl. BTW)
€ 87,00
(incl. BTW)
| Aantal stuks | Per stuk | Per Zak* |
| 1000 - 4000 | € 0,072 | € 72,00 |
| 5000 - 9000 | € 0,066 | € 66,00 |
| 10000 + | € 0,061 | € 61,00 |
| *prijsindicatie | ||
- RS-stocknr.:
- 270-7451
- Fabrikant:
- RS PRO
- Land van herkomst:
- TW
RS PRO Butt Splice Connector 16 to 22 AWG
Need a quick and easy way to mate, repair or lengthen wires? Choose this butt splice connector from RS PRO. Simply insert the wires into the holes on the sides of the splice and squeeze down on each side of the indentation using a crimper. This achieves a safe and reliable cable connection with no need for soldering.
This splice connector is also used to terminate single wires efficiently. Using an adhesive heat shrink over these units provides insulation, enhances device safety and reduces current leakage. Robust construction ensures the unit doesn't split when crimped and also protects from wire pull-outs.
This unit is stringently tested for durability and quality. Non-insulated butt splice terminals are useful for most general cabling applications, where there is minimal chance of short-circuiting, such as in small electric devices.
Features and Benefits
- Butt splice type
- Copper contact material
- Diameter of 3.3 mm
- Overall length of 15 mm
- Thickness of 0.8 mm
- Not insulated
- Wire size range of 16 to 22 AWG (American Wire Gauge) or 0.5 mm² to 1.5 mm²
Small Pack Size
Per Unit, RS stock no: 809-2363
Large Pack Size
RS stock no: 270-7451
Kenmerk | Waarde |
|---|---|
| Splice Type | Butt Splice |
| Minimum Wire Size mm² | 0.5mm² |
| Wire Size | 16 → 22 AWG |
| Overall Length | 15mm |
| Maximum Wire Size mm² | 1.5mm² |
| Minimum Wire Size AWG | 22AWG |
| Diameter | 3.3mm |
| Maximum Wire Size AWG | 16AWG |
| Insulation | Uninsulated |
| Number of Ways | 2 |
| Colour | Silver |
| Contact Material | Copper |
| Contact Plating | Tin |
| Thickness | 0.8mm |
- RS-stocknr.:
- 270-7451
- Fabrikant:
- RS PRO
- Land van herkomst:
- TW
RS PRO Butt Splice Connector 16 to 22 AWG
Need a quick and easy way to mate, repair or lengthen wires? Choose this butt splice connector from RS PRO. Simply insert the wires into the holes on the sides of the splice and squeeze down on each side of the indentation using a crimper. This achieves a safe and reliable cable connection with no need for soldering.
This splice connector is also used to terminate single wires efficiently. Using an adhesive heat shrink over these units provides insulation, enhances device safety and reduces current leakage. Robust construction ensures the unit doesn't split when crimped and also protects from wire pull-outs.
This unit is stringently tested for durability and quality. Non-insulated butt splice terminals are useful for most general cabling applications, where there is minimal chance of short-circuiting, such as in small electric devices.
Features and Benefits
- Butt splice type
- Copper contact material
- Diameter of 3.3 mm
- Overall length of 15 mm
- Thickness of 0.8 mm
- Not insulated
- Wire size range of 16 to 22 AWG (American Wire Gauge) or 0.5 mm² to 1.5 mm²
Small Pack Size
Per Unit, RS stock no: 809-2363
Large Pack Size
RS stock no: 270-7451
Kenmerk | Waarde |
|---|---|
| Splice Type | Butt Splice |
| Minimum Wire Size mm² | 0.5mm² |
| Wire Size | 16 → 22 AWG |
| Overall Length | 15mm |
| Maximum Wire Size mm² | 1.5mm² |
| Minimum Wire Size AWG | 22AWG |
| Diameter | 3.3mm |
| Maximum Wire Size AWG | 16AWG |
| Insulation | Uninsulated |
| Number of Ways | 2 |
| Colour | Silver |
| Contact Material | Copper |
| Contact Plating | Tin |
| Thickness | 0.8mm |