Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 verpakking van 100 eenheden)*
€ 19,30
(excl. BTW)
€ 23,40
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 4.500 stuk(s) vanaf 14 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 100 - 400 | € 0,193 | € 19,30 |
| 500 - 2400 | € 0,164 | € 16,40 |
| 2500 - 4900 | € 0,145 | € 14,50 |
| 5000 - 9900 | € 0,126 | € 12,60 |
| 10000 + | € 0,107 | € 10,70 |
*prijsindicatie
- RS-stocknr.:
- 613-9772
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Product Type | Splice Connector | |
| Splice Type | Parallel | |
| Overall Length | 16.5mm | |
| Minimum Wire Size mm² | 0.5mm² | |
| Diameter | 4mm | |
| Minimum Wire Size AWG | 22AWG | |
| Insulation | Insulated | |
| Maximum Wire Size AWG | 16AWG | |
| Maximum Wire Size mm² | 1.5mm² | |
| Colour | Red | |
| Insulation Material | Vinyl | |
| Series | RS PRO | |
| Contact Material | Copper | |
| Contact Plating | Tin | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Product Type Splice Connector | ||
Splice Type Parallel | ||
Overall Length 16.5mm | ||
Minimum Wire Size mm² 0.5mm² | ||
Diameter 4mm | ||
Minimum Wire Size AWG 22AWG | ||
Insulation Insulated | ||
Maximum Wire Size AWG 16AWG | ||
Maximum Wire Size mm² 1.5mm² | ||
Colour Red | ||
Insulation Material Vinyl | ||
Series RS PRO | ||
Contact Material Copper | ||
Contact Plating Tin | ||
Standards/Approvals No | ||
- Land van herkomst:
- TW
Small Pack Size
Per Unit, RS stock no: 613-9772
Large Pack Size
RS stock no: 270-7624
RS PRO Insulated Crimp Butt Splice Terminals
From RS PRO, a selection of insulated ferrules or Butt Connectors designed for crimping electrical wires. The tube-shaped terminals act as a solderless cable joint allowing electrical current to flow safely from one wire to another. Professionally designed using high-quality materials, RS PRO’s range of butt splice terminals are used to repair, change or lengthen electrical circuits.
The RS PRO range of insulated crimp butt splice terminals is easy to terminate, once the wire has been stripped simply guide the wires into each end of the copper tube and crimp using a suitable tool. The compression-style electrical connection provides good tensile strength while maintaining maximum contact with the wire. Constructed from high-grade copper with colour-coded vinyl insulation, the RS PRO series of butt splice terminals are an essential addition to any electrician’s tool kit.
Colour Coding
The insulated terminals or connectors sleeve is colour-coded for easy wire size identification. The colours of the connectors relate to a wire range the terminal can accept. The sizes can be quoted in either CSA (cross-sectional area) or AWG (American Wire Gauge)
Applications
FAQs
Is there a crimp tool that you can use for crimping the butt connectors?
Any good quality ratchet-style crimp tool or plier tool designed for butt terminals would suffice. RS PRO offers a range of reliable, cost-effective tools.
What is the difference between uninsulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.
Approvals
UL recognised component