SKF 48 Tooth Rough Stock Bore Sprocket, PHS 08B-1B48 08 B-1

RS-stocknr.:: 267-9141
Fabrikantnummer:: PHS 08B-1B48
Fabrikant:: SKF

SKF 48 Tooth Rough Stock Bore Sprocket, PHS 08B-1B48 08 B-1

Bekijk alle Sprockets

Subtotaal (1 eenheid)*

€ 25,14

(excl. BTW)

€ 30,42

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 14 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 25,14

*prijsindicatie

RS-stocknr.:: 267-9141
Fabrikantnummer:: PHS 08B-1B48
Fabrikant:: SKF

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SKF
	Product Type	Sprocket
	Number of Teeth	48
	Bore Diameter	16mm, 64mm
	Bore Type	Rough Stock Bore
	Pitch Diameter	194.18mm
	Hub Diameter	90mm
	Material	Steel
	Sprocket Width	40mm
	Maximum Inside Diameter	64mm
	Acceptable Chain Type	08 B-1
	Standards/Approvals	BS EN

	Alles selecteren
	Merk SKF
	Product Type Sprocket
	Number of Teeth 48
	Bore Diameter 16mm, 64mm
	Bore Type Rough Stock Bore
	Pitch Diameter 194.18mm
	Hub Diameter 90mm
	Material Steel
	Sprocket Width 40mm
	Maximum Inside Diameter 64mm
	Acceptable Chain Type 08 B-1
	Standards/Approvals BS EN

Datasheet - PHS 08B-1B48

Land van herkomst:: CN

SKF Sprocket, 48 Teeth, 194.18mm Pitch Diameter - PHS 08B-1B48

This sprocket is a toothed drive component designed for power transmission with 08B-1 roller chains in industrial systems. Manufactured from steel, it is intended for integration into mechanical drives where chain engagement and torque conveyance are required. The unit conforms to BS EN standards and suits applications demanding standardised sprocket geometry and material robustness.

Features and Benefits:

• 48 teeth deliver consistent chain engagement and load transfer
• 194.18mm pitch diameter ensures precise chain tracking
• Steel construction offers wear resistance under cyclic loading
• 40mm hub width supports stable lateral chain guidance
• Hub diameter 90mm provides secure mounting for coupled assemblies

Applications

• Suitable for conveyor drives in automation lines
• Ideal for reduction drives in electrical motor assemblies
• Used with timing chains in mechanical handling equipment
• Can be used for retrofit replacements in industrial gear trains

What bore options are available to fit various shafts?

The component is supplied with a rough stock bore that can be machined to final diameters between 16mm and 64mm to match shaft tolerances.

How does the internal diameter limit affect compatibility?

The maximum inside diameter is 64mm, which defines the largest shaft size after finishing that can be accommodated without additional adaptors.

What chain type does it engage and how does that influence selection?

It is designed for 08 B-1 chain engagement, so selection should match chain pitch class to maintain correct articulation and service life.

Are there mounting considerations due to hub proportions?

The 90mm hub diameter concentrates mounting forces centrally, so fastener design and hub fitment should account for imposed radial and axial loads.