RS PRO Non-Fused Terminal Block, 10-Way, 2.5mm² Wire Screw
- RS-stocknr.:
- 868-0733
- Fabrikant:
- RS PRO
Subtotaal (1 verpakking van 10 eenheden)*
€ 11,82
(excl. BTW)
€ 14,30
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 1.970 stuk(s) vanaf 02 november 2026
- Plus verzending 1.620 stuk(s) vanaf 09 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 + | € 1,182 | € 11,82 |
*prijsindicatie
- RS-stocknr.:
- 868-0733
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Number of Ways | 10 | |
| Product Type | Non-Fused Terminal Block | |
| Wire Size | 2.5mm² | |
| Mount Type | Panel | |
| Fused | No | |
| Contact Material | Brass | |
| Material | Polycarbonate | |
| Voltage | 450V | |
| Cable CSA | 2.5mm² | |
| Wire Protection | No | |
| Colour | Transparent Blue | |
| Minimum Operating Temperature | 85°C | |
| Termination Type | Screw | |
| Gender | Female | |
| Enclosed | Yes | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Hazardous Area Certification | No | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Number of Ways 10 | ||
Product Type Non-Fused Terminal Block | ||
Wire Size 2.5mm² | ||
Mount Type Panel | ||
Fused No | ||
Contact Material Brass | ||
Material Polycarbonate | ||
Voltage 450V | ||
Cable CSA 2.5mm² | ||
Wire Protection No | ||
Colour Transparent Blue | ||
Minimum Operating Temperature 85°C | ||
Termination Type Screw | ||
Gender Female | ||
Enclosed Yes | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Hazardous Area Certification No | ||
- Land van herkomst:
- IT
RS PRO 10 Way Non-Fused Terminal Block, 2.5 mm², Panel Mount, Screw Terminals, PC, 450 V
Use this RS PRO single-pole termination block to neatly secure two or more wires together. The product's polycarbonate (PC) casing is a safe alternative to using insulation tape and effectively insulates and directs the flow of the current to prevent electrical shocks and fires.
Brass screw clamps hold wires firmly in place so they don't come loose when the unit is exposed to mild bumps or vibrations. This ensures an uninterrupted power supply. You can use this item in temperatures of up to +85°C, which makes it moderately heat-resistant and suitable for indoor and outdoor settings not subjected to extreme conditions.
Compliance with EN 60998-1: 2004 and EN 60998-2-1: 2004 standards assures you this termination block tested suitable for use with domestic appliances in households or similar environments. You can safely use this item in your home, garage or workshop.
Features and Benefits
• Brass contact material
• Enclosed
• Not fused
• PC material
• Maximum operating temperature of +85°C
• Panel mounting type
• Ten ways
• Screw termination method
• End connector terminal block strip type
• Voltage rating of 450 V
• Wire size of 2.5 mm²
Gerelateerde Links
- RS PRO Non-Fused Terminal Block 2.5mm² Wire Screw
- RS PRO Non-Fused Terminal Block 2.5mm² Wire Screw
- RS PRO Non-Fused Terminal Block 2.5mm² Wire, 16A Screw
- RS PRO Non-Fused Terminal Block 2.5mm² Wire, 16A Screw
- RS PRO Non-Fused Terminal Block 2.5mm² Wire, 24A Screw
- RS PRO Non-Fused Terminal Block 2.5mm² Wire, 24A Screw
- Legrand Non-Fused Terminal Block 2.5mm² Wire, 15A Screw
- RS PRO Fused Terminal Block 2.5mm² Wire, 6.3A Screw