RS PRO Non-Fused Terminal Block, 2-Way, 25mm² Wire Screw
- RS-stocknr.:
- 868-0761
- Fabrikant:
- RS PRO
Subtotaal (1 eenheid)*
€ 18,46
(excl. BTW)
€ 22,34
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 17 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 18,46 |
*prijsindicatie
- RS-stocknr.:
- 868-0761
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Number of Ways | 2 | |
| Product Type | Non-Fused Terminal Block | |
| Wire Size | 25mm² | |
| Mount Type | Cable | |
| Fused | No | |
| Contact Material | Nickel Plated Brass | |
| Material | Polycarbonate | |
| Voltage | 450V | |
| Wire Protection | No | |
| Cable CSA | 25mm² | |
| Colour | Transparent Blue | |
| Termination Type | Screw | |
| Minimum Operating Temperature | 85°C | |
| Maximum Operating Temperature | 85°C | |
| Enclosed | Yes | |
| Standards/Approvals | No | |
| Hazardous Area Certification | IEC/EN 60695-2-11 | |
| Contact Plating | Nickel | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Number of Ways 2 | ||
Product Type Non-Fused Terminal Block | ||
Wire Size 25mm² | ||
Mount Type Cable | ||
Fused No | ||
Contact Material Nickel Plated Brass | ||
Material Polycarbonate | ||
Voltage 450V | ||
Wire Protection No | ||
Cable CSA 25mm² | ||
Colour Transparent Blue | ||
Termination Type Screw | ||
Minimum Operating Temperature 85°C | ||
Maximum Operating Temperature 85°C | ||
Enclosed Yes | ||
Standards/Approvals No | ||
Hazardous Area Certification IEC/EN 60695-2-11 | ||
Contact Plating Nickel | ||
- Land van herkomst:
- IT
Twin Blocks with Indirect Clamping
The use of Twin-Block terminals is recommended to connect flexible copper cables from 10 to 120 sq.mm, ideal for applications in channels or conduits due to their compact size and ease of installation.
These Twin Block connectors guarantee a high degree of mechanical resistance and dielectric strength, and protection to IP 20 as required by CEI 64-8 part 5.
The particular structure and the clamping system allows you to make connections with a large contact area, without damage to the main conductor strands.
Twin-Blocks consist of:
Terminal screws in brass and steel with nickel plating and galvanizing treatmentsto protect against corrosion.and also provides increased protection in ammonia environments. The insulating body is made of self-extinguishing polycarbonate according to UL 94-V0, with a high degree of isolation. Clips to close and secure the connector are easy to operate and do not require the use of tools.
Multiple connections can be made in a single Twin Block if the total number of strands and area does not exceed the maximum permitted for a single conductor. The obvious advantage is the reduction of the number of blocks required and the corresponding ease and speed of installation.
Housing material: trasparent blue polycarbonate
Self-extinguishing: UL 94 - V0; IEC 695-2-1 a 850 °C; IEC 695-2-2
Operational peak temperature: 85 °C
Clamps: nickel plated brass
Screws: galvanized steel
Voltage rating: 450 V
Voltage test: 2500 V
Protection degree: IP 20
Standards
CEI EN 60998-1
CEI EN 60998-2-1
CEI EN 60999
CEI EN 60947-7-1
CEI EN 60998-2-1
CEI EN 60999
CEI EN 60947-7-1
Gerelateerde Links
- RS PRO Non-Fused Terminal Block 25mm² Wire Screw
- RS PRO Non-Fused Terminal Block 25mm² Wire Screw
- RS PRO Non-Fused Terminal Block 25mm² Wire, 101A Screw
- HENSEL DK Series Non-Fused Terminal Block 25mm² 102A Screw
- RS PRO Fused Terminal Block 25mm² Wire, 20A Screw
- RS PRO Fused Terminal Block 25mm² Wire, 20A Screw
- RS PRO Fused Terminal Block 25mm² Wire, 20A Screw
- RS PRO Fused Terminal Block 25mm² Wire, 20A Screw