Parallax Inc Arlo Plastic Shaft Base Pack
- RS-stocknr.:
- 843-0822
- Fabrikantnummer:
- 28960
- Fabrikant:
- Parallax Inc
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 843-0822
- Fabrikantnummer:
- 28960
- Fabrikant:
- Parallax Inc
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Parallax Inc | |
| Series | Arlo | |
| Structural Component Type | Plastic Shaft Base Pack | |
| Alles selecteren | ||
|---|---|---|
Merk Parallax Inc | ||
Series Arlo | ||
Structural Component Type Plastic Shaft Base Pack | ||
- Land van herkomst:
- US
Arlo Mobile Robot Base kit
Arlo Robot Base is a high-density polyethylene (HDPE) robotics platform, ideal for medium-sized robotics development. This rugged base platform is suitable for outdoor applications.
High Density Polyethylene (HDPE) base plate with pre-drilled and counter-sunk mounting holes
Base Plate dimensions: 450.9mm diameter x 9.5mm thick
1419 square cm of usable surface area
Hardware included for both single and double battery mounting
Battery shelf designed to carry one or two 12V, 8Ah SLA batteries
Double Battery Shelf dimensions: 177.8 x 336.6 x 9.5mm thick
Battery containment area dimensions: 66.7 x 203 x 171mm
Weight: 1.75kg
Operating temperature range: -18 to +65°C
Base Plate dimensions: 450.9mm diameter x 9.5mm thick
1419 square cm of usable surface area
Hardware included for both single and double battery mounting
Battery shelf designed to carry one or two 12V, 8Ah SLA batteries
Double Battery Shelf dimensions: 177.8 x 336.6 x 9.5mm thick
Battery containment area dimensions: 66.7 x 203 x 171mm
Weight: 1.75kg
Operating temperature range: -18 to +65°C
Supplied with
Mounting screws and standoffs, ball-end hex key, screwdriver
The Arlo Robotic System provides the basic hardware to build a mid-size robotics platform ideal for telepresence and autonomous robots. The format is one of a two-wheeled buggy with castors fore and aft. The user can then attach the processor board, motor control boards and sensor/actuator modules to suit their application.