Schneider Electric BRS3 Series 3-Phase Stepper Motor Stepper Motor 34V ac, 2.26Nm Torque, 1.8 °, 85 x 68 x 60 mm Frame,
- RS-stocknr.:
- 654-655
- Fabrikantnummer:
- BRS397H360AAA
- Fabrikant:
- Schneider Electric
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 654-655
- Fabrikantnummer:
- BRS397H360AAA
- Fabrikant:
- Schneider Electric
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Schneider Electric | |
| Product Type | Stepper Motor | |
| Sub Type | 3-Phase Stepper Motor | |
| Step Angle | 1.8° | |
| Holding Torque | 2.26Nm | |
| Voltage | 34V ac | |
| Frame Size | 85 x 68 x 60 mm | |
| Mount Type | Flange | |
| Shaft Diameter | 12mm | |
| Current Rating | 5.8A | |
| Shaft Length | 30mm | |
| IP Rating | IP56, IP41 | |
| Number of Pole Pairs | 3 | |
| Length | 68mm | |
| Resistance Per Phase | 0.35Ω | |
| Standards/Approvals | IP56, IP41, IEC 50347, IEC 60034-5, IEC 60072-1, RoHS | |
| Output Speed | 3000rpm | |
| Series | BRS3 | |
| Alles selecteren | ||
|---|---|---|
Merk Schneider Electric | ||
Product Type Stepper Motor | ||
Sub Type 3-Phase Stepper Motor | ||
Step Angle 1.8° | ||
Holding Torque 2.26Nm | ||
Voltage 34V ac | ||
Frame Size 85 x 68 x 60 mm | ||
Mount Type Flange | ||
Shaft Diameter 12mm | ||
Current Rating 5.8A | ||
Shaft Length 30mm | ||
IP Rating IP56, IP41 | ||
Number of Pole Pairs 3 | ||
Length 68mm | ||
Resistance Per Phase 0.35Ω | ||
Standards/Approvals IP56, IP41, IEC 50347, IEC 60034-5, IEC 60072-1, RoHS | ||
Output Speed 3000rpm | ||
Series BRS3 | ||
- Land van herkomst:
- DE
The Schneider Electric Three-phase stepper motor from the Lexium BRS3 series. This motor series is characterized by its robust construction and optimized internal geometry, ensuring a very powerful stepper motor and minimizing maintenance requirements. This motor has a holding torque of 1.92 Nm. The flange dimensions are 85 mm, the motor length is 68 mm, and the centering collar is 60 mm. The shaft has a diameter of 12 mm, is smooth, and the shaft end has an IP41 protection rating. The motor housing has an IP56 protection rating. The motor has a shaft end for the drive connection.
Electrical connection is wires
Shaft end is smooth wave
Second wave is without a second shaft end