Festo EMMT Series Hybrid Stepper Motor 48V, 2.4Nm Torque, 1.8 °, 87 mm Frame, 6.35 mm Shaft

This stepper motor is a Compact hybrid device designed to deliver precise incremental motion for industrial automation and robotics. It operates at 48V and provides fine positional control with a 1.8° step angle, while the sealed enclosure supports use where protection from ingress is required. The rotor configuration yields a balance of speed capability and holding capacity suitable for controlled motion systems.

• 2.4Nm holding torque provides steady load retention during stops
• 7.8A current rating enables higher torque output at working speeds
• 2200rpm output speed supports Faster indexing and traverse cycles
• 0.13Ω resistance per phase reduces voltage drop during pulses
• IP65 enclosure allows use in environments with water exposure

• Suitable for CNC automation requiring high pole-pair resolution
• Ideal for robotics requiring sealed drive components
• Used with motion controllers in industrial indexing systems
• Can be used for rotary actuators needing substantial holding torque
• Used for positioning modules where any mount position is needed

The shaft diameter is 6.35mm with a length of 30mm which suits standard couplings and collets.

A 50 pole-pair configuration increases electromagnetic steps per revolution, improving microstep responsiveness for smoother motion.

The unit holds CE, RoHS, cULus and IEC 60034 attestations and UL E342973 recognition for conformity with multiple standards.

The motor is specified for use in any position to simplify integration into varied machine layouts.