Trinamic QSH6018 Series Hybrid Stepper Motor, 2.1Nm Torque, 3.36 V, 1.8°, 8mm Shaft
- RS-stocknr.:
- 284-4858
- Artikelnummer Distrelec:
- 154-22-354
- Fabrikantnummer:
- QSH6018-65-28-210
- Fabrikant:
- Trinamic
Informatie over voorraden is momenteel niet toegankelijk
- RS-stocknr.:
- 284-4858
- Artikelnummer Distrelec:
- 154-22-354
- Fabrikantnummer:
- QSH6018-65-28-210
- Fabrikant:
- Trinamic
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Trinamic | |
| Stepper Motor Type | Hybrid | |
| Step Angle | 1.8° | |
| Holding Torque | 2.1Nm | |
| Number Of Wires | 4 | |
| Supply Voltage | 3.36 V | |
| Shaft Diameter | 8mm | |
| Series | QSH6018 | |
| Alles selecteren | ||
|---|---|---|
Merk Trinamic | ||
Stepper Motor Type Hybrid | ||
Step Angle 1.8° | ||
Holding Torque 2.1Nm | ||
Number Of Wires 4 | ||
Supply Voltage 3.36 V | ||
Shaft Diameter 8mm | ||
Series QSH6018 | ||
- Land van herkomst:
- IT
The two-phase hybrid stepper motors are specifically optimized for micro stepping and seamlessly integrate with the TRINAMIC family of motor controllers and drivers. With a 4-wire connection setup, they offer simplified installation and operation. These motors utilize neodymium magnets to maximize torque output while meeting CE approval and RoHS compliance standards, ensuring reliability and environmental friendliness. Their compatibility, efficiency, and adherence to regulatory standards make them ideal for various precision motion control applications.
Step angle 1.8˚
Optimized for micro step operation
Up to 75V operating voltage
Optimized for micro step operation
Up to 75V operating voltage
Gerelateerde Links
- Trinamic PD-1161 Series Series Hybrid Stepper Motor 30 V 8mm Shaft
- Trinamic PANdrive Series Stepper Motor 51 V 8mm Shaft
- Trinamic QSH6018 Series Stepper Motor Stepper Motor 2.52V 1.8 ° 8 mm Shaft
- Trinamic QSH6018 Series Stepper Motor Stepper Motor 4.17V 1.8 ° 8 mm Shaft
- Trinamic QSH6018 Series Stepper Motor Stepper Motor 2.1V 1.8 ° 8 mm Shaft
- Trinamic PANdrive Series Stepper Motor Unit Stepper Motor 2V 1.8 ° 8 mm Shaft
- Trinamic PD-1070 Series Hybrid Stepper Motor 28 V, 1.8°
- Trinamic PD-1070 Series Hybrid Stepper Motor 28 V, 1.8°