RS PRO Stepper Motor 2.8V, 0.22Nm Torque, 1.8 °, 42.3 x 42.3 mm Frame, 5 mm Shaft
- RS-stocknr.:
- 535-0467
- Fabrikant:
- RS PRO
Subtotaal (1 eenheid)*
€ 38,87
(excl. BTW)
€ 47,03
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 5 stuk(s) klaar voor verzending
- 132 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 38,87 |
*prijsindicatie
- RS-stocknr.:
- 535-0467
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Product Type | Stepper Motor | |
| Step Angle | 1.8° | |
| Holding Torque | 0.22Nm | |
| Voltage | 2.8V | |
| Frame Size | 42.3 x 42.3 mm | |
| Shaft Diameter | 5mm | |
| Current Rating | 1.33A | |
| Winding Arrangement | Unipolar, Bipolar | |
| IP Rating | IP54, IP65 | |
| Shaft Length | 22mm | |
| Number of Pole Pairs | 1 | |
| Resistance Per Phase | 2.1Ω | |
| Depth | 33mm | |
| Standards/Approvals | RoHS Compliant | |
| Output Speed | 186rpm | |
| Detent Torque | 72mNm | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Product Type Stepper Motor | ||
Step Angle 1.8° | ||
Holding Torque 0.22Nm | ||
Voltage 2.8V | ||
Frame Size 42.3 x 42.3 mm | ||
Shaft Diameter 5mm | ||
Current Rating 1.33A | ||
Winding Arrangement Unipolar, Bipolar | ||
IP Rating IP54, IP65 | ||
Shaft Length 22mm | ||
Number of Pole Pairs 1 | ||
Resistance Per Phase 2.1Ω | ||
Depth 33mm | ||
Standards/Approvals RoHS Compliant | ||
Output Speed 186rpm | ||
Detent Torque 72mNm | ||
- Land van herkomst:
- CN
RS PRO Hybrid Stepper Motor 1.8°, 0.22 Nm, 2.8 V, 1.33 A, 4 Wires
Use this RS PRO hybrid stepper motor to make controlled and precise and movements with electric devices. Stepper motors have brushless assemblies and divide a full motor rotation into smaller, equal steps. This increases precision and efficiency at slower speeds. To maximize power in smaller devices, this hybrid stepper integrates permanent magnet and variable reluctance motor technologies.
The motor is RoHS (Restriction of Hazardous Substances) compliant, so it doesn't contain harmful levels of hazardous materials like lead. And like all products from our RS PRO range, it's been tested by engineers for consistency and quality.
These hybrid steppers are typically found in lasers and optics applications, as components of complex devices from linear actuators to goniometers and rotation stages. You'll find them in a variety of commercial devices, too, including camera lenses, DVD players and 3D printers.
Features and Benefits
• Step angle of 1.8°
• Holding torque of 0.22 Nm
• Four-wire bipolar winding
• Voltage rating of 2.8 V
• Frame size of 42.3 x 42.3 mm
• Hybrid stepper motor type with permanent magnet
• Current rating of 1.33 A
• Depth of 33 mm
• Resistance per phase of 2.1 Ω
• RoHS (Restriction of Hazardous Substances) compliant
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Gerelateerde Links
- RS PRO Stepper Motor 2.8V 1.8 ° 5 mm Shaft
- RS PRO Stepper Motor 2.8V 1.8 ° 5 mm Shaft
- RS PRO Stepper Motor 2.8V 0.9 ° 5 mm Shaft
- RS PRO Hybrid Stepper Motor 2.8V 0.9 ° 5 mm Shaft
- RS PRO Hybrid Stepper Motor 9.6V 1.8 ° 5 mm Shaft
- RS PRO Hybrid Stepper Motor 12V 1.8 ° 5 mm Shaft
- Trinamic QSH4218 Series Stepper Motor Stepper Motor 4.5V 1.8 ° 5 mm Shaft
- Trinamic QSH4218 Series Stepper Motor Stepper Motor 1.4V 1.8 ° 5 mm Shaft