Applied Motion Systems STM Series Dual Hybridge Stepper Motor 48V, 0.88Nm Torque, 1.8 °, 42 mm Frame, 6.35 mm Shaft
- RS-stocknr.:
- 877-7247
- Fabrikantnummer:
- STM23IP-2EE
- Fabrikant:
- Applied Motion Systems
Subtotaal (1 eenheid)*
€ 963,02
(excl. BTW)
€ 1.165,25
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 1 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 963,02 |
*prijsindicatie
- RS-stocknr.:
- 877-7247
- Fabrikantnummer:
- STM23IP-2EE
- Fabrikant:
- Applied Motion Systems
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Applied Motion Systems | |
| Product Type | Stepper Motor | |
| Sub Type | Dual Hybridge | |
| Step Angle | 1.8° | |
| Holding Torque | 0.88Nm | |
| Voltage | 48V | |
| Frame Size | 42 mm | |
| Shaft Diameter | 6.35mm | |
| Current Rating | 5A | |
| Shaft Length | 18.4mm | |
| Standards/Approvals | CE EN61800-3:2004, RoHS Compliant | |
| Depth | 92.4mm | |
| Output Speed | 51200spm | |
| Series | STM | |
| Alles selecteren | ||
|---|---|---|
Merk Applied Motion Systems | ||
Product Type Stepper Motor | ||
Sub Type Dual Hybridge | ||
Step Angle 1.8° | ||
Holding Torque 0.88Nm | ||
Voltage 48V | ||
Frame Size 42 mm | ||
Shaft Diameter 6.35mm | ||
Current Rating 5A | ||
Shaft Length 18.4mm | ||
Standards/Approvals CE EN61800-3:2004, RoHS Compliant | ||
Depth 92.4mm | ||
Output Speed 51200spm | ||
Series STM | ||
- Land van herkomst:
- US
Integrated Steppers STM23IP
The STM23IP is an integrated Drive and Motor, fusing step motor and drive technologies into a single device, offering savings on space, wiring and cost over conventional motor and drive solutions.
Drive + Motor + Control in one unit
4 quadrant controller
Dynamic Current Control
Anti-Resonance
Torque Ripple Smoothing
Microstep Emulation
Stall Prevention/Detection
NEMA 23 frame size
Input voltage 12-70 Vdc
3 digital input, 1 analog input
1 digital output
Ethernet and Ethernet/IP interface
Encoder
Operation Mode:
Step and direction
CW/CCW pulse
A/B quadrature pulse
velocity (oscillator, joystick)
streaming commands (SCL)
SiNet Hub compatible
Executes stored Q programmes
Applied Motion Systems - Stepper Motor
Gerelateerde Links
- Applied Motion Systems STM Series Dual Hybridge Stepper Motor 48V 1.8 ° 6.35 mm Shaft
- Applied Motion Systems STM Series Dual Hybridge Stepper Motor 48V 1.8 ° 5 mm Shaft
- Applied Motion Systems Stepper Motor Controller, 5 A
- Applied Motion Systems Stepper Motor Controller 10A, Amplifier Function
- Applied Motion Systems Stepper Motor Controller 300 mA Amplifier Function
- Applied Motion Systems Stepper Motor Controller 100 mA Current Controller Function
- Applied Motion Systems Stepper Motor Controller 100 mA Current Controller Function
- RS PRO Hybrid Stepper Motor 5.4 V 56.4 x 56.4mm Frame, 6.35mm Shaft