- RS-stocknr.:
- 100-4328
- Fabrikantnummer:
- 09-1034
- Fabrikant:
- Vero Technologies
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
137 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 9,38
(excl. BTW)
€ 11,35
(incl. BTW)
Aantal stuks | Per stuk |
1 - 9 | € 9,38 |
10 - 24 | € 8,74 |
25 - 49 | € 8,17 |
50 - 99 | € 7,61 |
100 + | € 6,86 |
- RS-stocknr.:
- 100-4328
- Fabrikantnummer:
- 09-1034
- Fabrikant:
- Vero Technologies
Datasheets
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
Veros Copper Stripboard
Veros brilliant copper stripboard will suit your purpose for doing simple prototyping work or for development circuitry. It is manufactured from a copper clad laminate board. It features pierced copper tracks and a base material of SRBP. Stripboards also give you brilliant access to solder your components with relative ease.
Features and benefits:
Create a simple printed circuit with the copper strips forming the interconnections
This stripboard can be cut into a smaller board
Single sided copper
Tracks are bonded to SRBP board and pierced to accept terminal pins.
Board Size: 160x100x1.02mm
Fibreglass material
This stripboard can be cut into a smaller board
Single sided copper
Tracks are bonded to SRBP board and pierced to accept terminal pins.
Board Size: 160x100x1.02mm
Fibreglass material
Why a stripboard and not a breadboard?
Stripboards and breadboards are slightly different. A breadboard is for early stage prototyping where soldering is not required where as a stripboard can be used for soldering. Breadboards make great use for testing components and basic circuitry. With stripboards you can solder components and make it more of a permanent circuit over a breadboard.
Stripboards and breadboards are slightly different. A breadboard is for early stage prototyping where soldering is not required where as a stripboard can be used for soldering. Breadboards make great use for testing components and basic circuitry. With stripboards you can solder components and make it more of a permanent circuit over a breadboard.
Stripboard cutter: 543-535
DIN Type Matrixboard
Matrix boards with 1mm holes on a 2.50mm pitch.
Specificaties
Kenmerk | Waarde |
---|---|
Base Material | Synthetic Resin Bonded Paper |
Number of Sides | 1 |
Dimensions | 160 x 100 x 1.6mm |
Copper Thickness | 35µm |
Hole Diameter | 1.02mm |
Hole Layout | 39 x 64 |
Hole Pitch | 2.5 x 2.5mm |
FR Material Grade | FR1 |
Length | 160mm |
Thickness | 1.6mm |
Width | 100mm |