FIBET 2025DE06-60 Shock Mount M6 5.5daN Compression Load 5mm, Female Only Natural Rubber

  • RS-stocknr. 777-3250
  • Fabrikantnummer 2025DE06-60
  • Fabrikant FIBET
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Female Bobbin Mount End Stop - Type DE

Thanks to their progressive absorption, these VP bobbin mount end stops can be used in a wide range of applications to prevent over-loading and shocks. They have been made from natural rubber and are available in a variety of hardnesses.

Female Thread
Natural Rubber
Zinc Plated Steel End Section
Progressive Absorption

Specificaties
Kenmerk Waarde
Type Female Only
Compression Load 5.5daN
Compression Deflection 5mm
Thread Size M6
Material Natural Rubber
Metalwork Zinc Plated Steel
Diameter 20mm
Overall Height 25mm
Maximum Operating Temperature +100°C
Minimum Operating Temperature -45°C
28 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
184 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 4)
2,86
(excl. BTW)
3,46
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
4 - 16
€ 2,86
€ 11,44
20 - 36
€ 2,74
€ 10,96
40 - 96
€ 2,683
€ 10,732
100 +
€ 2,625
€ 10,50
*prijsindicatie
Related Products
Type DD Bobbin Mounts can be used on ...
Description:
Type DD Bobbin Mounts can be used on a wide range of applications, and are able to be used incompression or shear. They are made from Natural Rubber in a variety of hardnesses depending on the application, and have zinc ...
Made from a natural rubber these mounts are ...
Description:
Made from a natural rubber these mounts are simple and economical to fix and would be very useful if used for vibration isolation depending on the radial forces. Suitable for compression (axial) and shear (radial).
Made from a natural rubber these mounts are ...
Description:
Made from a natural rubber these mounts are simple and economical to fix and would be very useful if used for vibration isolation depending on the radial forces. Suitable for compression (axial) and shear (radial).
Made from a natural rubber these mounts are ...
Description:
Made from a natural rubber these mounts are simple and economical to fix and would be very useful if used for vibration isolation depending on the radial forces. Suitable for compression (axial) and shear (radial).