onsemi Boost Converter, Surface, 5V Output Voltage, 800 mA Output Current, 5 Outputs
- RS-stocknr.:
- 161-2659P
- Fabrikantnummer:
- NCP1422MNR2G
- Fabrikant:
- onsemi
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 161-2659P
- Fabrikantnummer:
- NCP1422MNR2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Output Voltage 1 | 5V | |
| Product Type | Boost Converter | |
| Output Current | 800mA | |
| Mount Type | Surface | |
| Number of Outputs | 5 | |
| Efficiency | 94% | |
| Ripple and Noise | 100mV | |
| Maximum Operating Temperature | -40°C | |
| Minimum Operating Temperature | 85°C | |
| Number of Pins | 10 | |
| Series | NCP1422 | |
| Package Type | DFN | |
| Line Regulation | 1 mV/V | |
| Width | 3mm | |
| Depth | 1mm | |
| Length | 3mm | |
| Standards/Approvals | No | |
| Maximum Input Voltage | 5V | |
| Load Regulation | 1 mV/V | |
| Minimum Input Voltage | 1V | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Output Voltage 1 5V | ||
Product Type Boost Converter | ||
Output Current 800mA | ||
Mount Type Surface | ||
Number of Outputs 5 | ||
Efficiency 94% | ||
Ripple and Noise 100mV | ||
Maximum Operating Temperature -40°C | ||
Minimum Operating Temperature 85°C | ||
Number of Pins 10 | ||
Series NCP1422 | ||
Package Type DFN | ||
Line Regulation 1 mV/V | ||
Width 3mm | ||
Depth 1mm | ||
Length 3mm | ||
Standards/Approvals No | ||
Maximum Input Voltage 5V | ||
Load Regulation 1 mV/V | ||
Minimum Input Voltage 1V | ||
- Land van herkomst:
- KR
NCP1422 is a monolithic micropower high frequency step-up switching converter IC specifically designed for battery-operated hand-held electronic products up to 800mA loading. It integrates Sync-Rect to improve efficiency and to eliminate the external Schottky Diode. High switching frequency (up to 1.2 MHz) allows for a low profile, small-sized inductor and output capacitor to be used. When the device is disabled, the internal conduction path from LX or BAT to OUT is fully blocked and the OUT pin is isolated from the battery.
Output Current up to 800 mA
High Switching Frequency, up to 1.2MHz
Anti-Ringing Ring-Killer for Discontinuous Conduction Mode
Low Quiescent Current of 8.5 μA
1.0V Startup at No Load Guaranteed
Output Voltage from 1.5V to 5V Adjustable
1.5A Cycle by Cycle Current Limit
On Chip Thermal Shutdown with Hysteresis
Housed in Space-Saving and Low Profile DFN10 package