STMicroelectronics Buck Converter, Surface Mount, 38V Output Voltage, 2 A Output Current, 1 Outputs
- RS-stocknr.:
- 225-0014P
- Fabrikantnummer:
- L6986ITR
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Subtotaal 25 eenheden (geleverd op een doorlopende strip)*
€ 66,70
(excl. BTW)
€ 80,70
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 25 - 45 | € 2,668 |
| 50 - 120 | € 2,40 |
| 125 - 245 | € 2,16 |
| 250 + | € 2,052 |
*prijsindicatie
- RS-stocknr.:
- 225-0014P
- Fabrikantnummer:
- L6986ITR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Output Voltage 1 | 38V | |
| Product Type | Buck Converter | |
| Output Current | 2A | |
| Mount Type | Surface Mount | |
| Number of Outputs | 1 | |
| Power | 5W | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Number of Pins | 16 | |
| Output Voltage 2 | 0.6V | |
| Series | L6986L | |
| Package Type | HTSSOP-16 | |
| Width | 6.6mm | |
| Standards/Approvals | No | |
| Length | 5.1mm | |
| Depth | 1.2mm | |
| Maximum Input Voltage | 38V | |
| Minimum Input Voltage | 4V | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Output Voltage 1 38V | ||
Product Type Buck Converter | ||
Output Current 2A | ||
Mount Type Surface Mount | ||
Number of Outputs 1 | ||
Power 5W | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Number of Pins 16 | ||
Output Voltage 2 0.6V | ||
Series L6986L | ||
Package Type HTSSOP-16 | ||
Width 6.6mm | ||
Standards/Approvals No | ||
Length 5.1mm | ||
Depth 1.2mm | ||
Maximum Input Voltage 38V | ||
Minimum Input Voltage 4V | ||
The STMicroelectronics 5 W synchronous iso-buck converter is a device specifically designed for the isolated buck topology. Due to the P-Channel MOSFET as high-side power switch the device features 100% duty cycle operation. The primary output voltage can be accurately adjusted, whereas the isolated secondary output is derived by using a given transformer ratio. No optocoupler is required. The primary sink capability up to 1.9 A (even during softstart) allows a proper energy transfer to the secondary side as well as enables a tracked soft-start of the secondary output.
Designed for iso-buck topology
4 V to 38 V operating input voltage
Primary output voltage regulation / no optocoupler required
1.9 A typical sink Peak primary current capability
Peak current mode architecture in forced PWM operation
300 ns blanking time