STMicroelectronics Buck Converter, Surface
- RS-stocknr.:
- 234-8891P
- Fabrikantnummer:
- STEF12SPUR
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Subtotaal 25 eenheden (geleverd op een doorlopende strip)*
€ 34,25
(excl. BTW)
€ 41,50
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 25 - 45 | € 1,37 |
| 50 - 120 | € 1,324 |
| 125 - 245 | € 1,288 |
| 250 + | € 1,258 |
*prijsindicatie
- RS-stocknr.:
- 234-8891P
- Fabrikantnummer:
- STEF12SPUR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Buck Converter | |
| Mount Type | Surface | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -40°C | |
| Series | STEF12S | |
| Standards/Approvals | No | |
| Length | 3.15mm | |
| Width | 3.15mm | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Buck Converter | ||
Mount Type Surface | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -40°C | ||
Series STEF12S | ||
Standards/Approvals No | ||
Length 3.15mm | ||
Width 3.15mm | ||
The STMicroelectronics STEF12S series is an integrated electronic fuse optimized to monitor the 12 V DC power lines. When connected in series to the main power rail, it is able to precisely detect and react to overcurrent and overvoltage conditions. Undervoltage lockout prevents the load from malfunction, keeping the device off if the rail voltage is too low.
15 V typical output overvoltage clamp
Absolute maximum voltage of 25 V
Adjustable current limit
Thermal protection
Input under voltage lockout
Low inrush current during start-up
Integrated 40 mΩ Power FET
En/fault pin
Adjustable slew rate for output voltage
Gate control pin for reverse current blocking FET (DFN10 package)
TSOT23-8L and DFN10 (3x3 mm) packages
Latch (STEF12S) or autoretry (STEF12SA) versions