Siemens RDJ Wall Mount Room Thermostat 1 Input, 1 Output Relay 3V dc PID Controller

RS-stocknr.:: 245-176
Fabrikantnummer:: RDJ100 / S55770-T379
Fabrikant:: Siemens

Siemens RDJ Wall Mount Room Thermostat 1 Input, 1 Output Relay 3V dc PID Controller

Subtotaal (1 eenheid)*

€ 82,93

(excl. BTW)

€ 100,35

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

2 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 82,93

*prijsindicatie

RS-stocknr.:: 245-176
Fabrikantnummer:: RDJ100 / S55770-T379
Fabrikant:: Siemens

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Siemens
	Product Type	Room Thermostat
	Output Type	Relay
	Number of Inputs	1
	Number of Outputs	1
	Maximum Current	5A
	Maximum Operating Temperature	40°C
	Minimum Operating Temperature	0°C
	Control Type	PID Controller
	Terminal Type	Screw
	Maximum Supply Voltage	3V dc
	Maximum Voltage	250V ac
	Display Type	LCD
	Width	120mm
	Standards/Approvals	Safety class II, RCM Conformity, EU Conformity (CE)
	IP Rating	IP20
	Length	90mm
	Mount Type	Wall Mount
	Series	RDJ

	Alles selecteren
	Merk Siemens
	Product Type Room Thermostat
	Output Type Relay
	Number of Inputs 1
	Number of Outputs 1
	Maximum Current 5A
	Maximum Operating Temperature 40°C
	Minimum Operating Temperature 0°C
	Control Type PID Controller
	Terminal Type Screw
	Maximum Supply Voltage 3V dc
	Maximum Voltage 250V ac
	Display Type LCD
	Width 120mm
	Standards/Approvals Safety class II, RCM Conformity, EU Conformity (CE)
	IP Rating IP20
	Length 90mm
	Mount Type Wall Mount
	Series RDJ

Land van herkomst:: CN

Siemens RDJ Series Room Thermostat, 5A Maximum Current, 250V AC Maximum Voltage - RDJ100 / S55770-T379

This room thermostat is a Compact wall-mounted controller designed to regulate ambient temperature in commercial and industrial settings. It presents a clear LCD for setpoint monitoring and uses a control algorithm suited to maintain stable conditions. The device operates on common AC supplies and switches loads via an internal relay, making it appropriate for integration into building automation and equipment cabinets where straightforward temperature control is required.

Features and Benefits:

• PID control ensures steady temperature regulation and reduced cycling
• Relay output supports switching up to 5A for external loads
• LCD provides instant Visual feedback for user adjustments
• Screw terminals enable secure wiring and straightforward installation
• IP20 enclosure permits indoor use in protected locations

Applications

• Suitable for HVAC control in commercial plant rooms
• Ideal for temperature regulation of electrical enclosures
• Used with heating actuators and small fans in commercial spaces
• Can be used for process temperature monitoring in machinery rooms

What input and output arrangements are available for integration?

It provides a single input channel and one relay output to Interface with standard room sensors and control a single switched load.

Which supply voltages can the unit tolerate for normal operation?

The controller accepts supply voltages up to 250V AC and is designed for low-voltage logic at 3V for internal electronics.

How does the device perform across temperature ranges encountered on site?

It is specified for operation between 0 °C and 40 °C to suit typical indoor environments without additional environmental protection.

What mounting and Terminal provisions aid installation on site?

The unit is designed for wall mounting and features screw-type terminals for reliable conductor connection.

What safety and regulatory characteristics are indicated on the product?

It carries Safety Class II designation along with RCM and CE conformity for deployment in compliant installations.