P.M.A KS40 Panel PID Temperature Controller, 2 Output Relay 250V ac On-Off
- RS-stocknr.:
- 736-4985
- Fabrikantnummer:
- KS40-102-0009D-000
- Fabrikant:
- P.M.A
Afbeelding representeert productcategorie
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 736-4985
- Fabrikantnummer:
- KS40-102-0009D-000
- Fabrikant:
- P.M.A
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | P.M.A | |
| Output Type | Relay | |
| Product Type | PID Temperature Controller | |
| Number of Outputs | 2 | |
| Maximum Operating Temperature | 65°C | |
| Minimum Operating Temperature | -20°C | |
| Control Type | On-Off | |
| Maximum Supply Voltage | 250V ac | |
| Auxiliary Power Supply | 24 V | |
| Digital Comms | RS485, Modbus RTU, RS422 | |
| Display Type | Multi Line | |
| Maximum Voltage | 250V ac | |
| Standards/Approvals | DIN 46 244 | |
| IP Rating | IP00, IP65, IP20 | |
| Width | 96 mm | |
| Length | 118mm | |
| Series | KS40 | |
| Mount Type | Panel | |
| Panel Depth | 118mm | |
| Alles selecteren | ||
|---|---|---|
Merk P.M.A | ||
Output Type Relay | ||
Product Type PID Temperature Controller | ||
Number of Outputs 2 | ||
Maximum Operating Temperature 65°C | ||
Minimum Operating Temperature -20°C | ||
Control Type On-Off | ||
Maximum Supply Voltage 250V ac | ||
Auxiliary Power Supply 24 V | ||
Digital Comms RS485, Modbus RTU, RS422 | ||
Display Type Multi Line | ||
Maximum Voltage 250V ac | ||
Standards/Approvals DIN 46 244 | ||
IP Rating IP00, IP65, IP20 | ||
Width 96 mm | ||
Length 118mm | ||
Series KS40 | ||
Mount Type Panel | ||
Panel Depth 118mm | ||
N.v.t.
- Land van herkomst:
- GB
PMA KS 40-1 Temperature Controller
The universal temperature controller KS 40-1 is intended for universal, precise, and cost-effective control tasks in all branches of industry. For this, the unit provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external setpoint input.
The KS 40-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter.
This controller is particularly well suited to the following industry applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers.
• BluePort® Front interface and BlueControl Software
• Maintenance manager and error list
• Automatic/Manual key
• Monitoring of heating current and input circuit
• Timer and programmer
• Extended limit signalling function with latch
• Type tested to EN 14597 (replaces DIN 3440), cULus
PMA Temperature Controllers
Standards
CE Certified
Supplied with
German Manual
Gerelateerde Links
- P.M.A KS40 PID Temperature Controller 3 Output, 90 → 250 V ac Supply Voltage
- P.M.A KS40 PID Temperature Controller 2 Output Relay, 90 → 250 V ac Supply Voltage ON/OFF
- P.M.A KS40 PID Temperature Controller 2 Output, 90 → 250 V ac Supply Voltage ON/OFF
- P.M.A KS40 Panel Mount PID Temperature Controller 3 Output Relay, 90 → 250 V ac Supply
- P.M.A KS40 Panel Mount PID Temperature Controller 3 Output, 90 → 250 V ac Supply Voltage
- P.M.A KS40 PID Temperature Controller 2 Output Relay 24 V ac Supply Voltage
- P.M.A KS40 PID Temperature Controller 3 Output Relay 24 V ac Supply Voltage
- P.M.A KS42 PID Temperature Controller 3 Output, 90 → 250 V ac Supply Voltage