Jumo DICON Touch DIN Rail PID Temperature Controller 4 Input, 2 Output 2 Relay 240V ac On-Off

Bekijk alle Temperature Controllers

Subtotaal (1 eenheid)*

€ 1.044,76

(excl. BTW)

€ 1.264,16

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks
Per stuk
1 +€ 1.044,76

*prijsindicatie

RS-stocknr.:
823-9833
Artikelnummer Distrelec:
301-42-409
Fabrikantnummer:
703571/8-01-00-00-00-00-00-00-00-23-00/000,000,000
Fabrikant:
Jumo
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Jumo

Output Type

2 Relay

Product Type

PID Temperature Controller

Number of Inputs

4

Number of Outputs

2

Maximum Current

20mA

Maximum Operating Temperature

55°C

Minimum Operating Temperature

-5°C

Terminal Type

Screw

Control Type

On-Off

Maximum Supply Voltage

240V ac

Display Type

TFT

Maximum Voltage

240V ac

Length

96mm

Width

96 mm

IP Rating

IP20, IP66

Standards/Approvals

cULus, EN

Mount Type

DIN Rail

Series

DICON Touch

Input Type

Analogue

Panel Depth

130.9mm

Land van herkomst:
DE

DICON touch - Process- and Program Controller


The DICON touch is a two-channel universal process and program controller that displays information using a vibrant TFT colour graphics display. The device is operated intuitively by touch.

Both control channels use the tried-and-tested JUMO control algorithm with two possible optimization options. These enable a simple and highly-accurate startup. It enables multiple zone control, cascade control, or other complex control tasks.

4 analog universal inputs and up to 8 external inputs can record a variety of physical measured values with high precision. The actuators can be controlled directly in the device with either an analog or digital setup. These can be expanded further through external digital outputs. Interfaces such as Modbus, PROFIBUS, or Ethernet with web server can be used for the communication with higher-order systems.

An individual process screen can be created by using the configuration software. Using the recording extra-code important analog and digital process values can be saved so that they are tamper-proof, so that they can be graphically visualized, and so that they can be exported via interface or USB-stick in a tamper-proof fashion to the PC.

The configuration software ensures that the process controller can be easily programmed, that math or logical coherences can be described, and that customer-specific linearization can be created. In addition, tools for simulating external signals or control paths are included. These tools can also record for the duration of the startup.

A comprehensive alarm and limit-value concept as well as a flexible digital signal administration complete the "all-in-one" device.

TFT-touchscreen with intuitive operation

Precise control of two processes

Easy-to-use program generator control and program entry

Interfaces: USB host, USB device, Modbus, PROFIBUS-DP, and Ethernet

Process-data recording with tamper-proof data storage

Individual process-screen display with configurable edit boxes

Math and logic module

Flexible through modular hardware

Password-protected user management

Five-digit analog-value display

Individual user and parameter level

Control loop and output value monitoring

Integrated timer (time-switch contacts) as well as service counter and operating hours counter

Web server for online-visualization via web browser

Alarm transmission by email

Protection type IP66

Gerelateerde Links