- RS-stocknr.:
- 727-6226
- Fabrikantnummer:
- SHT25
- Fabrikant:
- Sensirion
Bekijk deze categorie
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
74 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Prijs Each
€ 17,61
(excl. BTW)
€ 21,31
(incl. BTW)
Aantal stuks | Per stuk |
1 - 3 | € 17,61 |
4 - 19 | € 15,14 |
20 - 99 | € 12,67 |
100 - 199 | € 10,29 |
200 + | € 9,96 |
Verpakkingsopties
- RS-stocknr.:
- 727-6226
- Fabrikantnummer:
- SHT25
- Fabrikant:
- Sensirion
Datasheets
Wetgeving en compliance
- Land van herkomst:
- CH
Productomschrijving
SHT2x Digital Humidity & Temperature Sensors
The Sensirion SHT2x series of DFN digital humidity & temperature sensors are CMOSens® based. They are an industry standard, widely used humidity and temperature sensor. Humidity is measured using a capacitive sensor while temperature is measured using a band-gap sensor.
The SHT2x sensors also contain a version 4 silicon chip with an amplifier, A/D converter, OTP memory and a digital interface. They come in a plastic package which leaves the sensor area open, protecting the devices from external impact and providing long-term stability.
SHT2x sensors are ideal for both high and low volume applications.
The SHT21P has a PWM output and the SHT21S has a PDM output; these can be converted into analogue outputs by the use of suitable low-pass filters.
SHT20 - Low cost, SHT21 - Standard, SHT25 - High Accuracy
The SHT2x sensors also contain a version 4 silicon chip with an amplifier, A/D converter, OTP memory and a digital interface. They come in a plastic package which leaves the sensor area open, protecting the devices from external impact and providing long-term stability.
SHT2x sensors are ideal for both high and low volume applications.
The SHT21P has a PWM output and the SHT21S has a PDM output; these can be converted into analogue outputs by the use of suitable low-pass filters.
SHT20 - Low cost, SHT21 - Standard, SHT25 - High Accuracy
CMOSens® based technology
Fully calibrated
I²C serial interface (Not SHT21P/SHT21S)
Digital output
Low power consumption
Long-term stability
Supply voltage range: 2.1 to 3.6 V
Fully calibrated
I²C serial interface (Not SHT21P/SHT21S)
Digital output
Low power consumption
Long-term stability
Supply voltage range: 2.1 to 3.6 V
The following sensors are available:
Temperature & Humidity Sensors, Sensirion
Specificaties
Kenmerk | Waarde |
Sensor Function | Temperature & Humidity |
Output Type | Digital |
Interface Type | Serial-I2C |
Accuracy | ±1.8%RH |
Mounting Type | Surface Mount |
Pin Count | 6 |
Minimum Operating Temperature | -40 °C |
Operating Temperature Range | -40 to +125 °C |
Maximum Operating Temperature | +125 °C |
Minimum Operating Supply Voltage | 2.1 V |
Maximum Operating Supply Voltage | 3.6 V |
Package Type | DFN |
Length | 3mm |
Height | 1.1mm |
Width | 3mm |
Resolution | 12 bit |
Dimensions | 3 x 3 x 1.1mm |