Honeywell Technologies HIH-4000 Series, Analogue Output Humidity Sensor, Through Hole Mount, Analogue, ±3.5 %RH, 3-Pin

RS-stocknr.:: 874-4562
Artikelnummer Distrelec:: 173-21-491
Fabrikantnummer:: HIH-4000-004
Fabrikant:: Honeywell Technologies

Honeywell Technologies HIH-4000 Series, Analogue Output Humidity Sensor, Through Hole Mount, Analogue, ±3.5 %RH, 3-Pin

Subtotaal (1 eenheid)*

€ 61,83

(excl. BTW)

€ 74,81

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 61,83

*prijsindicatie

RS-stocknr.:: 874-4562
Artikelnummer Distrelec:: 173-21-491
Fabrikantnummer:: HIH-4000-004
Fabrikant:: Honeywell Technologies

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell Technologies
	Product Type	Humidity Sensor
	Output Type	Analogue
	Sub Type	Humidity Sensor
	Interface Type	Analogue
	Accuracy	±3.5 %RH
	Mount Type	Through Hole
	Pin Count	3
	Maximum Operating Temperature	85°C
	Minimum Operating Temperature	-40°C
	Minimum Supply Voltage	4V
	Maximum Supply Voltage	5.8V
	Package Type	SIP
	RH Range	0 to 100 %
	Length	4.17mm
	Standards/Approvals	No
	Height	8.59mm
	Width	2.03mm
	Series	HIH-4000
	Sensor Gain	-4mV/°C
	Automotive Standard	No

	Alles selecteren
	Merk Honeywell Technologies
	Product Type Humidity Sensor
	Output Type Analogue
	Sub Type Humidity Sensor
	Interface Type Analogue
	Accuracy ±3.5 %RH
	Mount Type Through Hole
	Pin Count 3
	Maximum Operating Temperature 85°C
	Minimum Operating Temperature -40°C
	Minimum Supply Voltage 4V
	Maximum Supply Voltage 5.8V
	Package Type SIP
	RH Range 0 to 100 %
	Length 4.17mm
	Standards/Approvals No
	Height 8.59mm
	Width 2.03mm
	Series HIH-4000
	Sensor Gain -4mV/°C
	Automotive Standard No

Honeywell Humidity Sensor, 3 Pin, 5.8V - HIH-4000 Series - HIH-4000-004

This humidity sensor from Honeywell uses a clever SIP (system-in-package) design to keep it compact. Its small size of 4.17 (length) by 2.03mm (width) means it fits in where space is tight. The sensor is a highly efficient and accurate component. It's laser-trimmed and uses a capacitive sensing element and integrated signal conditioning for a quick and reliable response. The linear voltage output draws a current of just 200μA (microamps), making it a low-power component that's well-suited to battery-operated devices. This humidity sensor has a moulded and layered thermoset plastic case to make it chemical, oil and dust resistant for a long service life.

Features & Benefits

• Through-hole mounting for quick and secure installation on PCBs (printed circuit boards)

• Wide operating temperature range of -40°C to +85°C for use in extreme conditions or outdoors

• Works with supply voltages between 4 and 5.8V for greater flexibility

Applications

• OEM (original equipment manufacturer) assemblies

• Refrigeration and HVAC (heating, ventilation and air conditioning) equipment

• Measurement and control systems

What conditions is this sensor calibrated to?

This device is calibrated at 5V DC and +25ºC, ready for immediate installation in your controller or device under normal conditions.

HIH-4000/4020/4021 Series Humidity Sensors, Honeywell

The HIH-4000 series has been specifically designed for use in high volume OEM (Original Equipment Manufacturer) applications. These sensors utilise a near linear voltage output making direct input to a controller or other devices possible. They are ideally suited for low drain, battery operated systems with a typical current draw of only 200 μA.

Potential Applications:

Refrigeration equipment

HVAC equipment

Medical equipment

Drying

Meteorology

Battery-powered systems

OEM assemblies

Features:

Moulded thermoset plastic housing

Near linear voltage output vs %RH

Laser-trimmed interchangeability

Enhanced accuracy, fast response

Fast response time

Stable, low drift performance

Chemically resistant