Pico Technology PT100 General Temperature Probe, 150 mm Length, 6 mm Diameter, 350 °C Max

This temperature probe is a general-purpose sensor designed to measure temperatures across a wide operating range for industrial and laboratory environments. It uses a PT100 sensing element and connects via a 4‑pin mini‑DIN interface, with a flexible 2 m cable for convenient placement. The probe is intended to deliver precise readings over both low- and high-temperature scenarios encountered in routine process monitoring.

• ±0.15°C accuracy delivers repeatable measurement precision
• PT100 sensor type provides stable resistance-based sensing
• 4‑pin Mini‑DIN connector enables secure, multi-wire signal interface
• 2 m cable offers flexible installation and remote mounting
• −30°C to 350°C span covers low to high temperature monitoring

• Suitable for process control temperature acquisition systems
• Ideal for equipment testing requiring precise thermal data
• Used with data loggers that accept PT100 inputs
• Can be used for HVAC diagnostic temperature measurements
• Appropriate for laboratory experiments requiring wide-range sensing

It employs a PLATINUM resistance sensing element conforming to PT100 characteristics for temperature-dependent resistance measurement.

The Interface requires a compatible 4‑pin mini‑DIN receptacle and wiring to support a four‑wire PT100 connection scheme.

The 2 m length permits remote positioning of the sensing tip while keeping the connector accessible for instruments.

The sensor is specified to operate across a measurement range from -30°C up to 350°C.

The probe uses a cylindrical 6 mm diameter construction with a 150 mm insertion length for immersion or surface-contact measurements.

The measurement temperature range and accuracy specifications relate to the sensor tip only. It is necessary to add the sensor error to the PT-104 error.