Pomona Black, Red Test Connector Adapter With Brass contacts and Nickel Plated

RS-stocknr.:: 221-8214
Artikelnummer Distrelec:: 146-65-113
Fabrikantnummer:: 1452
Fabrikant:: Pomona

Pomona Black, Red Test Connector Adapter With Brass contacts and Nickel Plated

Subtotaal (1 eenheid)*

€ 25,00

(excl. BTW)

€ 30,25

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 69 stuk(s) vanaf 12 oktober 2026
Plus verzending 16 stuk(s) vanaf 19 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 25,00

*prijsindicatie

RS-stocknr.:: 221-8214
Artikelnummer Distrelec:: 146-65-113
Fabrikantnummer:: 1452
Fabrikant:: Pomona

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Pomona
	Colour	Black, Red
	Product Type	Test Connector Adapter
	Connector Gender B	Male
	Contact Material	Brass
	Contact Plating	Nickel
	Voltage	500Vrms
	Connector Type A	Binding Post
	Connector Type B	BNC Receptacle
	Standards/Approvals	No

	Alles selecteren
	Merk Pomona
	Colour Black, Red
	Product Type Test Connector Adapter
	Connector Gender B Male
	Contact Material Brass
	Contact Plating Nickel
	Voltage 500Vrms
	Connector Type A Binding Post
	Connector Type B BNC Receptacle
	Standards/Approvals No

Datasheet - 1452

Land van herkomst:: US

Fluke Test Connector Adapter, 500Vrms Voltage, Black - 1452

This test connector adapter converts binding-post connections to a BNC receptacle for use in laboratory and field test environments. It allows banana-plug-equipped leads to mate with equipment that accepts a male BNC, and is specified for hand-held and controlled hands-free voltage conditions.

Features and Benefits:

• 500Vrms rating permits controlled hands-free high-voltage testing
• 50Ω nominal impedance supports consistent signal integrity
• Nickel-plated brass contacts resist corrosion during repeated use
• Dual-colour insulated posts enable clear polarity identification
• ABS-moulded insulation tolerates elevated temperatures

Applications

• Suitable for connecting banana-plug leads to BNC equipment
• Ideal for bench-top measurement setups requiring 50Ω termination
• Used with handheld probes under low-voltage conditions
• Can be used for controlled-voltage hands-free test arrangements
• Used for Rapid side stack-up connections via cross holes

What maximum voltage is permitted for handheld testing?

For hand-held measurements the adapter is rated to 30VAC/60VDC maximum.

How are polarity and earthing identified on the connector?

One insulated binding post is red and the other is black to designate polarity and earth/ground.

What materials comprise the conductive parts and protective finish?

Conductive bodies are brass with a nickel plating applied to contact surfaces.

How does the adapter handle thermal conditions during use?

The insulation is ABS moulding specified for operation up to +115°C maximum.

What impedance should test instruments expect when using this adapter?

Instruments should see a nominal impedance of 50 ohms when connected.