Thermal Interface Pad, Thin Film Polyimide, 1.3W/m·K, 41.91 x 28.96mm 0.152mm, Self-Adhesive

  • RS-stocknr. 169-4634
  • Fabrikantnummer SPK10-0.006-AC-05
  • Fabrikant Bergquist
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Sil-Pad K10 insulators

High-performance insulators, which combine Kapton MT type polyamide film with the boron nitride reinforced silicon elastomer.
Electrical insulators and thermal conductors.
These replace ceramic insulators used when mechanical resistance is required.
Overcomes the risks of breaking.
Very good electrical insulation behaviour.

Specificaties
Kenmerk Waarde
Dimensions 41.91 x 28.96mm
Thickness 0.152mm
Length 41.91mm
Width 28.96mm
Thermal Conductivity 1.3W/m·K
Material Thin Film Polyimide
Self-Adhesive Yes
Minimum Operating Temperature -60°C
Maximum Operating Temperature +180°C
Hardness Shore A 90
Material Trade Name Sil-Pad K10
Operating Temperature Range -60 → +180 °C
110 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
2,159
(excl. BTW)
2,612
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 40
€ 2,159
€ 21,59
50 - 90
€ 2,052
€ 20,52
100 - 240
€ 1,944
€ 19,44
250 - 490
€ 1,853
€ 18,53
500 +
€ 1,80
€ 18,00
*prijsindicatie
Related Products
Phase change thermal Interface material with aluminium carrier ...
Description:
Phase change thermal Interface material with aluminium carrier intended for use between a computer processor and a heat sink.,Adhesive on one side,Requires pressure of assembly to cause flow.,Applications: ,Computer and peripherals,Power conversion,High performance computer processor,Power semiconductors ,Power ...
Long term stabilityElectrical insulationExcellent compressibilityApplicationsBattery packs, battery housings, ...
Description:
Long term stabilityElectrical insulationExcellent compressibilityApplicationsBattery packs, battery housings, power supplies, power cable connectors. Automotive ECU (electronic control units), power supplies, microprocessors, displays and consumer electronics.
Long term stabilityElectrical insulationExcellent compressibilityApplicationsBattery packs, battery housings, ...
Description:
Long term stabilityElectrical insulationExcellent compressibilityApplicationsBattery packs, battery housings, power supplies, power cable connectors. Automotive ECU (electronic control units), power supplies, microprocessors, displays and consumer electronics.
With hole except model SL018AL20, which is designed ...
Description:
With hole except model SL018AL20, which is designed for clip mounting and not screw mounting.Harder than all metal alloys, aluminium ceramic is an exceptional material allowing extraordinary performance in a very wide field of applications.Electrical insulators and thermal conductors.High resistance ...