Amphenol Advanced Sensors Thermistor 10 Ω 4.32 mm
- RS-stocknr.:
- 210-4308P
- Fabrikantnummer:
- CL-110
- Fabrikant:
- Amphenol Advanced Sensors
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 50 eenheden (geleverd in een zak)*
€ 54,55
(excl. BTW)
€ 66,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 750 stuk(s) vanaf 14 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 90 | € 1,091 |
| 100 - 240 | € 1,07 |
| 250 - 990 | € 1,047 |
| 1000 + | € 1,025 |
*prijsindicatie
- RS-stocknr.:
- 210-4308P
- Fabrikantnummer:
- CL-110
- Fabrikant:
- Amphenol Advanced Sensors
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Amphenol Advanced Sensors | |
| Product Type | Thermistor | |
| Series | Thermometric Diode | |
| Mount Type | Surface | |
| Automotive Standard | No | |
| Application | Motor, Fluorescent Lamp, Power Supplies | |
| Resistance at 25°C | 10Ω | |
| Pin Count | 2 | |
| Standards/Approvals | RoHS | |
| Diameter | 10.16mm | |
| Depth | 4.32mm | |
| Maximum Operating Temperature | 175°C | |
| Minimum Operating Temperature | -40°C | |
| Alles selecteren | ||
|---|---|---|
Merk Amphenol Advanced Sensors | ||
Product Type Thermistor | ||
Series Thermometric Diode | ||
Mount Type Surface | ||
Automotive Standard No | ||
Application Motor, Fluorescent Lamp, Power Supplies | ||
Resistance at 25°C 10Ω | ||
Pin Count 2 | ||
Standards/Approvals RoHS | ||
Diameter 10.16mm | ||
Depth 4.32mm | ||
Maximum Operating Temperature 175°C | ||
Minimum Operating Temperature -40°C | ||
- Land van herkomst:
- US
The Amphenol Advanced Sensor's CL-110 is Inrush Current Limiting Thermistors consists of a disc thermistor with uninsulated lead-wires, and are used to control inrush current when switching power supplies. The main purpose of limiting inrush current is to prevent components in series with the input to the DC/DC convertor from being damaged. Typically, inrush protection prevents nuisance blowing of fuses or breakers as well as welding of switch contacts. With resistance of 10 ohms, and steady state current is 3.2 A.
Small physical size offers design-in benefits over large passive components.
Low cost, solid state device for inrush current suppression.
Best-in-class capacitance rating.
Low steady resistance and accompanying power loss.
Suitable for PCB mounting.
Wide operating temperature range: -58 F to 347 F (-50 C to 175 C).