Camloc by Alcoa Thread Repair Insert, M6 x 1, Drill Size 7.5mm

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Keenserts Inserts


The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

Manufactured from stainless steel
Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials
In thread repair use, the defect thread can be replaced with the same nominal diameter
Significantly increases load capability in weaker materials
Special keys lock the Keensert into place eliminating rotation
Easy to install no special taps required and no tangs to remove
High resistance to torque out and pull out
Camloc Inserts & Tools available in lightweight & heavy duty versions

KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711

The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.
Drilling and tapping can be done without any specialist equipment, just standard drills and taps.
For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Specificaties
Kenmerk Waarde
Thread Size M6 x 1
Drill Size 7.5mm
29 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
76 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 5
29,93
(excl. BTW)
36,22
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 +
€ 29,93
€ 5,986
*prijsindicatie
Related Products
The cordless impact screwdriver by Makita with continuous ...
Description:
The cordless impact screwdriver by Makita with continuous speed control. Featuring LED working lights, hexagonal socket and 110 Nm torque. Equipped with a fast motor, two 4.0Ah batteries and charger. Suitable for M5 to M12 screws. Ideal for working in ...
The GSB 18V-85C professional cordless combi drill from ...
Description:
The GSB 18V-85C professional cordless combi drill from Bosch, with full connectivity to set your personal tool settings with Kickback Control. Featuring better user protection than standard programmed tools. Compatible with the Bosch GCY 30-4 bluetooth module via the Toolbox ...
Professional lightweight 12V drill driver (body only) with ...
Description:
Professional lightweight 12V drill driver (body only) with a compact design ideal for working in tight confined areas and for overhead work. Battery not included. Light weight compact tool with a length of only 169mmHardwearing tool with Bosch Durashield housing ...
Ergonomic shapePowerfull L.E.D. light for illuminated work3-Speed design ...
Description:
Ergonomic shapePowerfull L.E.D. light for illuminated work3-Speed design produces 25% faster working speedShift-Lock™ drive system shifts from "hammer drill" to "driver" mode with one touchTwo-piece armature and field along with externally accessible brushesTorque settings 16 + 1 drilling22min charge time4 ...