Camloc by Alcoa M5 x 0.8 Threaded Insert Hand Tool

  • RS-stocknr. 668-4682
  • Fabrikantnummer KRTM5-01
  • Fabrikant Keenserts
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Keenserts Inserts


The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

Manufactured from stainless steel
Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials
In thread repair use, the defect thread can be replaced with the same nominal diameter
Significantly increases load capability in weaker materials
Special keys lock the Keensert into place eliminating rotation
Easy to install no special taps required and no tangs to remove
High resistance to torque out and pull out
Camloc Inserts & Tools available in lightweight & heavy duty versions

KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711

The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.
Drilling and tapping can be done without any specialist equipment, just standard drills and taps.
For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Specificaties
Kenmerk Waarde
Thread Size Range M5 x 0.8
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 05-06-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
79,14
(excl. BTW)
95,76
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 79,14
Related Products
Metric ISO thread repair kit.These kits contain 10 ...
Description:
Metric ISO thread repair kit.These kits contain 10 threaded inserts, a drill bit (up to M12), a precision tap, an HSS tap, a fitting tool (up to M12), all supplied in one case.Ideal in situations where a thread has been ...
This kit is used to recover and repair ...
Description:
This kit is used to recover and repair damaged threads.Kit contents: different lengths and dimensions of HELICOIL® plus threaded inserts, drill bits, HSS manual threads, manual pins, tang breakers.Green colour to check the thread is present after fitting.
High quality Recoil™ industrial thread repair kitInserts are ...
Description:
High quality Recoil™ industrial thread repair kitInserts are reduced diameter type which can be installed without the need for a pre-winderKit contains installation ratchet tool, one of each M5, M6, M8, M10 installation tool adaptors and HSS taps plus four ...
Introducing thread repair kits from our own brand ...
Description:
Introducing thread repair kits from our own brand RS PRO, a range of kits designed to repair various sized damaged threads from M2.5 to M12. These versatile and durable sets include a variety of tools such as HSS drills, taps, ...