RS PRO Plain Nylon Threaded Bar, M8, 1m

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

RS PRO Nylon 66 1m Metric Threaded Rod

These 1m nylon metric threaded rods are fully threaded and made of Nylon 66, with a range of thread sizes available: M3 (RS: 280363), M4 (RS: 280379), M5 (RS: 280385), M6 (RS: 280391), M8 (RS: 280408), M10 (RS: 280414) and M12 (RS: 280420). These rods are constructed to DIN975 standards.

Frequently Asked Questions

What are threaded rods?


Threaded rods, also referred to as studs, are helically-threaded rods made of metal, such as steel, brass and stainless steel, or sometimes plastic, like nylon. Similar to screws but without a head, these rods combine linear and rotational movement to create a strong fastening bond between materials, with the thread allowing for nuts and bolts to also be used when required. As these rods are designed to withstand very high levels of pressure and tension, they are commonly used in support systems among a variety of other applications.

What are they made of?


These threaded rods are made of Nylon 66, a stiff, tough, and durable polymer that provides a high mechanical strength yet remains lightweight. Nylon is also highly resistant to a lot of environmental factors, such as fuel, oil, wear, impact and fatigue, although it is not UV resistant. Nylon 66 also has a lower water absorption rate than nylon 6, as well as good electrical insulating properties, making it suitable for electrical applications.


It is important that care is taken to fasten nylon threaded rods with nylon nuts and bolts, especially in industries where low-weight components can be critical, such as automotive, marine, and construction projects.

What are they used for?


Threaded rods have many applications, acting as a pin to fasten, hold or connect two materials together. The threading on the rod provides a tightening action, using friction to hold the fastening together. Threaded rods can be used with woods, metals and even concrete to provide either a permanent or temporary base to support projects. This especially applies to construction projects, such as studding concrete foundations to provide additional support.

Specificaties
Kenmerk Waarde
Thread Size M8
Material Nylon
Length 1m
Thread Length Style Fully Threaded
Finish Plain
60 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
140 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
8,302
(excl. BTW)
10,045
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 8,302
€ 41,51
*prijsindicatie
Related Products
Hand operated hydraulic pumps and pump sets with ...
Description:
Hand operated hydraulic pumps and pump sets with a maximum working pressure of 700 bar. The pumps hydraulic outlet port thread size is 3/8in x 18NPT. Durable glass-filled nylon reservoir and nylon encapsulating aluminium pump base for maximum corrosion resistanceTo ...
Hand operated hydraulic pumps and pump sets with ...
Description:
Hand operated hydraulic pumps and pump sets with a maximum working pressure of 700 bar. The pumps hydraulic outlet port thread size is 3/8in x 18NPT. Durable glass-filled nylon reservoir and nylon encapsulating aluminium pump base for maximum corrosion resistanceTo ...
Threaded rod - metricTo DIN975 A2 grade 18/8 ...
Description:
Threaded rod - metricTo DIN975 A2 grade 18/8 stainless steel (Type 304 S15) Can be used up to 800°C Suitable for use in most food, medical, chemical, construction and electronic applications.