Dormer Threading Tap, M3 Thread, Metric Coarse Standard, Hand Tap
- RS-stocknr.:
- 274-473
- Fabrikantnummer:
- E557M3
- Fabrikant:
- Dormer
Subtotaal (1 eenheid)*
€ 8,98
(excl. BTW)
€ 10,87
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 09 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 8,98 |
*prijsindicatie
- RS-stocknr.:
- 274-473
- Fabrikantnummer:
- E557M3
- Fabrikant:
- Dormer
Specificaties
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Dormer | |
| Thread Size | M3 | |
| Product Type | Threading Tap | |
| Sub Type | Spiral Flute | |
| Thread Standard | Metric Coarse | |
| Thread Direction | Right Hand | |
| Overall Length | 48mm | |
| Hand/Machine Tap | Hand Tap | |
| Material | HSS | |
| Finish | Bright | |
| Standards/Approvals | ISO Standard | |
| Alles selecteren | ||
|---|---|---|
Merk Dormer | ||
Thread Size M3 | ||
Product Type Threading Tap | ||
Sub Type Spiral Flute | ||
Thread Standard Metric Coarse | ||
Thread Direction Right Hand | ||
Overall Length 48mm | ||
Hand/Machine Tap Hand Tap | ||
Material HSS | ||
Finish Bright | ||
Standards/Approvals ISO Standard | ||
Vrijgesteld
- Land van herkomst:
- IN
The Dormer Tapping is designed for manual tapping using electric tools, and it addresses a common challenge in tapping, especially for blind holes. When tapping, long, stringy chips are often produced, and if not properly evacuated, they can cause serious issues. The helical flute design helps to move the chips away from the hole during tapping, preventing this problem.
Helical Flute Design
Improved Chip Evacuation
Gerelateerde Links
- Dormer Threading Tap 0.5mm Pitch Metric Coarse Standard Hand Tap M3 Thread
- Dormer Threading Tap HSS 0.5mm Pitch Metric Coarse Standard M3 Thread
- Dormer Threading Tap 0.5mm Pitch, Metric Coarse Standard
- Dormer Threading Tap 0.8mm Pitch Metric Coarse Standard Hand Tap M5 Thread
- Dormer Threading Tap 1.25mm Pitch Metric Coarse Standard Hand Tap M8 Thread
- Dormer Threading Tap 1.75mm Pitch Metric Coarse Standard Hand Tap M12 Thread
- Dormer Threading Tap 0.7mm Pitch Metric Coarse Standard Hand Tap M4 Thread
- Dormer Threading Tap 1.5mm Pitch Metric Coarse Standard Hand Tap M10 Thread